Mitsubishi 380/9g 3.8L custom turbo vehicle

[redblower]

Am well on the way to having this completed, probably by end of the month or next month.
aiming for a conservative 400-500 hp

So far...

-dual Garrett ball bearing turbos with inbuilt waste gate assy
-Link Extreme G4 ecu fitted and running complete with knock sensor
-660cc Siemens injectors and modified injector rail
-Walbro fuel pump
-dual full length exhaust custom stainless steel
-custom fabricated exhaust manifolds and heatshields
-custom catalyctic converter fabrication, placement same as stock
-custom intercooler and piping..(in progress and a pain in the ass)

Here are some random pics will post more if anyone interested.

[keith6110]

wow that manifold looks good! Too bad the demand for them or not high =/

[OrangeDemon]

Did u use the lancer turbo manifold and modify for this?

Sent from my DROID RAZR using Tapatalk 2

[redblower]

Did u use the lancer turbo manifold and modify for this?

nope, fabricated from scratch...LOL,....its a V6...not a 4 cyl, not enough cylinders

[redblower]

here's some more views of bits and pieces

[Galantman03]

Dang! Looks tight

[wetamup2k3g]

Legit! I love to see what you guys overseas are doing, it's never any slight stuff, y'all go big!

[RollingKeg]

That looks really good... Looking at this makes me want to put more time into project that's been heitus for 2 years.

[Blue3000GTguy]

And, every day, 9gs are getting more and more awesome.
Thank you for helping them get there.

[Dominicano]

nope, fabricated from scratch...LOL,....its a V6...not a 4 cyl, not enough cylinders

so you use the 6g75 stock flange but what headers did you use to match up? do tell lol

[redblower]

so you use the 6g75 stock flange but what headers did you use to match up? do tell lol

Aghhh......the flange is custom laser cut, not using stock one..the whole lot apart from mufflers etc is fully custom fabricated ...from scratch...
this platform has little to no support....I might change that soon...

Will replicate it all during the year because will end up doing this to to or three others in my collection me thinks

Although we don't have regular emmissions checks here it is irresponsible to emit cancer causing chemicals onto my fellow man...so...200 cpi metal cats in the headers, better than stock ceramics.

May as well do it right first time.

(Of course the engine is forged with Wiseco forged pistons at 8.5 CR,pauter rods,nitrided crank etc etc... and the auto has a Quaife limited slip differential with Koni coilovers all round...)

Will be about $30k spent on this little project when all done...

I really do like my big full sized Mitsubishi cars...small cars just don't do it for me...:)


This is seriously good fun watching it all come together.

[redblower]

This week's update..

Great workmanship on the rear exhaust outlets....



perfectly symmetrical pipe lengths.



factory hot dog silencer strategy retained, but with new units.



exhaust gas crossover joint and flexible exhaust couplings



passenger side intercooler piping, fully concealed behind bumper bar



Spot the hidden black powder coated modified Subaru WRX intercooler?



Both turbocharger unit intakes come from the rear of the modified stock air filter box.



Modified throttle body intake piping.



custom fabricated Y pipe for merging two turbo intake pipes

[keith6110]

wow true duals is sick. Loving this build!

[IVORY_G]

This is awesome work!

[redblower]

Here's some more pics including the very very first dyno run before any serious tune.

253kw/700nM torque and only 4000 rpm ...at the wheels!

Stupid amount of power, have told the tuner to wind it back to more sensible levels....those Yokohama tyres are 500 dollars each...:)

It was shredding the tyres on the dyno...

Anyway...it has a fair bit of dyno tuning time to go but you get the idea guys.....it's pretty damn scarey...

[IVORY_G]

I think that equates to approx 340HP? Thats just right in my opinion, I'd keep it right there :)

[redblower]

I think that equates to approx 340HP? Thats just right in my opinion, I'd keep it right there :)

yep...your maths is spot on.

I only want a little bit more (400hp) when switching to track mode (it is having a 3 stage software controlled boost controller)

[redblower]

Here is "proof of life"

http://youtu.be/HTQWvAT4Vx0

[mysticj]

So stock looking, its scary!

[redblower]

Here is a youtube video of the car being tuned for fuel pressure regulator on the dyno

http://www.youtube.com/watch?v=M_0b-...ature=youtu.be