like what? trannys been in the car for almost 2 years running fine. About to swap in my second tranny in the spring since i experimented/learned on this one. Everything there is to know is stated in the first post. The rest can be ignored.
Only sonata f5m42 swapped. N/A build in motion.
can i get away with using a eclipse shifter or a evo shifter ? and what about the cables? can i also use 3g cables?
Evo 8 Head, BC 288/288 BC Springs & Retainers, Weisco Pistons and Eagle Rods 2.4 (Comperssion 9.5:1) ARP Headstuds and Mainstuds, Cosmetic Headgasket, New Clevite Bearings all around, Evo 8 Oil Pump, English Racing water pump, Gates Racing Timing belt, Findanza Adjustable cams, 2 255 walboro pumps, RC 1000s, AEM Rail, and 5 Speed swapped, powered by a 6262 T3 w/ .82 A/R.. WILL MY TRANNY HOLD THIS? Lets wait and see :)
Im also interested in this swap, because looking at the prices out here i can buy that transmission for 475 on car-part.com
Evo 8 Head, BC 288/288 BC Springs & Retainers, Weisco Pistons and Eagle Rods 2.4 (Comperssion 9.5:1) ARP Headstuds and Mainstuds, Cosmetic Headgasket, New Clevite Bearings all around, Evo 8 Oil Pump, English Racing water pump, Gates Racing Timing belt, Findanza Adjustable cams, 2 255 walboro pumps, RC 1000s, AEM Rail, and 5 Speed swapped, powered by a 6262 T3 w/ .82 A/R.. WILL MY TRANNY HOLD THIS? Lets wait and see :)
Question. I recall reading on another forum about this same swap and it stated that the shifting is different. It is push style intsead of pull or vice versa. So as i understand it 2nd is in 1st and 1st is in 2nd and so fourth.
What? push or pull is how the Throw Out Bearing and Pressure Plate interact.
15 F150 3.5 ecoboost 4x4 - daily driver
01 Galant ES V6 MT (sold)
00 Eclipse RS MT
thats why he turned the TOB rod counter clockwise to address this issue
aaahhhhhh. Thats what i thought but then i read this....http://www.club3g.com/forum/3g-eclip...ternative.html
VTECH Killer is talking about a kit to convert. I just wanted to make sure i was understanding all of this.
Every thing on that 3g forum is speculation. Yes it is a pull style clutch thats it. If your taking all of the required manual parts off a sonata and onto a galant why would the gears be in a different arrangement? virtually nothing changes it shifts and drives like a convectional standard. I made this thread cause i actually installed it any other threads might throw you off.
Only sonata f5m42 swapped. N/A build in motion.
The things I wonder about with using the Sonata transmission are the availability of poly motor mount inserts and a decent clutch. If somebody were to do this swap and later on decide to turbo their car, without access to those 2 items would be banging their head against a brick wall.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Tiburon 2.7, the sonata 2.7 and G4JS share the same clutch as i see in my searches. So finding a good/strong clutch shouldnt be hard. The transmission mount is a great deal bigger then mitsu's but if needed im sure a urethane one could be custom @ low cost.
And for a lsd im sure a 3g one would work (dont have any hard facts but i read that info some where).
Only sonata f5m42 swapped. N/A build in motion.
nice find on the clutch! I checked some things here at work and does in fact show that we sell the same clutch for the sonata 2.0 and the tiburon 2.7.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
I highly doubt a Mitsubishi diff would fit in a Hyundai trans.
Yeah certain years the 2.4 and 2.7 engine share the same clutch for my na build i might run a stage one exedy which is good enough for my expected numbers.
Actually there the same transmission internally if memory serves correct ill have to triple check but ive done research but i never documented anything so i cant remember 100%
Only sonata f5m42 swapped. N/A build in motion.
94 Galant GS: 4G67 head, 1G IM, Evo 8 TB, DeltaCam 272/264 Cams, Test Pipe, OE Avenger V6 60mm catback w/muffler, modified Outlander header, DIY COP setup, B/S delete, 315cc injectors, AEM UEGO WBO2, Black case 3G ECU
1994 GS FYI
DSM/CSM Manuals
possibly wrong thread as this question is 6g7X related;
would any of the hyundai v6 gearboxes bolt upto a 6g7x?? say the manua box from a tiburon 2.7L v6? it uses the delta v6, and from pictures it looks to share the same bell housing bolt pattern as a 6g7x
^^^pics of said bell housing?
Bookmarks