Can we get some part numbers to buy for front and rear. That kit looks awesome.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Good tip ordering the 2g kit instead of 3g!
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Can we get some part numbers to buy for front and rear. That kit looks awesome.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Nice, I bet it'll handle like its on rails even more so
The 2G Rear Prothane Bushing kit will be an experiment. I haven't seen anybody confirm it yet, but Silvertune has a full 2G rear suspension at his disposal, and after investigation, it seems the bushings will fit the same. I will keep fitment confirmation on hold until they are installed on my car.
Today another piece of the puzzle arrived.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Nice, evo 9 seats =)
Do they mount right up to our seat brackets or no?
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
I'll need to either make a bracket or at least some kind of adapters to mount it to since the holes wont line up.
Drunkoffjuic also informed me that www.wedgebrackets.com has brackets already made to adapt these into our cars. That's what he did to mount his Evo Recaros into his 3G.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
those seats are amazing to sit in
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
Look like some nice brackets! Awesome thanks Matt =)
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Next Sunday. Then a major teardown begins.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
If we get that dude to plow it out ahead of time I predict we have it down to bare frame by this hour Sunday night.
Everything forward of the firewall. Going to take care of the engine bay since it's showing some age, as well as cleaning it up a bit. The motor will get torn down to the short block and go back together with some breathing help, and the entire rear suspension will be getting some attention as well. The interior will also be stripped and put back together with only the necessary items to look complete.
In short, its going to be a scramble to get this thing on the road by the end of April for MAP's Boost for Boobies.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Im looking forward to seeing this all go down!!
The interior strip and reassemble to look complete is one of the best mods. No joke. Road noise barely increases
Sent from my HTC6500LVW using Tapatalk
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
I've already removed the padding under the carpet a few years ago, but now it's time to go back and clean up the last of it, including SRS, ABS, and most of the HVAC.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
If you want some extra muscle, let me know. I have nothing planned for next Sunday.
Bookmarks