I took the vac hose off the EGR vavle and plugged in the MAF sensor and the same problem occured, so I just put the hose back on the EGR valve.
This is what my OBDII scanner shows when I have my MAF sensor connected. I'm talking about the FUEL system.
When I put on normal amount of pressure on the gas pedal to drive the below picture happens, fuel says CLOSED and it hesitates and sputters for 10 seconds then it takes off.
When the car finally takes off after it hesitates the fuel says OPEN
When I let off the gas and let the car coast in gear the fuel says OPEN1
And the weird thing is when I let off the gas and let the car coast in gear the fuel says OPEN1 and as soon as I put on the gas the fuel says CLOSED and hesitates and sputters. I am wondering if there is something wrong with my fuel relay since I put gas on and it is like it cuts the fuel off.
When I have the MAF sensor unplugged the car acts normal, I think the fuel stays in OPEN1 and when the car coast in gear then the fuel says CLOSED. It's almost like the car has it backwards when the MAF sensor is plugged in.
Bookmarks