HJ Aussie Galant (E54A) 6A12 to VR4 6A12TT (E84A)

[Black8GV6]

^Noice! post some pics and vids of that sexy beast when its ready.

[karl_2ltgc]

More pics, its getting a 450x600mm intercooler that I had collecting dust in the shed, was once in my old 760 Turbo Volvo :)
Mounts welded on:







Started trimming bumper, needed less than I thought... currently waiting on som 3" to 2 1/4 reducer and 90 degree bends so I can do the plumbing up to the standard turbo pipes. Then can finish trimming bumper and take it for a spin.



Have AEM wideband and SAFC to go on still.
Then I will fit new tappets and rocker cover gaskets, fit walbro, surge tank and aeromotive FPR on its way from summit.

Looking to get it ready for track day at Mallalla (South Australia) in about a month! Will get a Go pro and take some footage.

[prawnpepsi1]

I did.... but I'll have to see if I can still find it lol

Also, I have a full set of E84A Brakes (Calipers) sitting around gathering dust, if you need anything off them, and a 6A12TT block, heads, cams etc

Hey mate Im just wondering if you still have an ECU diagram for the Galant HJ. Messing around with the wires in the ecu without knowing what they are for is pretty scary ahah

Cheers

[mko]

wow nice progress. I cant believe i missed this thread. Good job so far.

[Goku]

Hey mate Im just wondering if you still have an ECU diagram for the Galant HJ. Messing around with the wires in the ecu without knowing what they are for is pretty scary ahah

Cheers

Ummmmm...... I'll have to see if I can find it

[prawnpepsi1]

Ummmmm...... I'll have to see if I can find it

Thanks itll help alot. Im just after two wires really Crank Angle Sensor and RPM Signal but even better if its the whole thing :)

[karl_2ltgc]