Looks good so far! Wish I had sanded my block when I had it all apart. I was in such a hurry to make mod though lol.
Looks good so far! Wish I had sanded my block when I had it all apart. I was in such a hurry to make mod though lol.
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Makes me wish I had a v6 base
Sent from my Z796C using Tapatalk
Currently on my 3rd 8G... Not giving up this time!
Endeavor motor I see. Do you plan on using a different set of cams? Those endeavor cams are a 240/248 duration. A worthy choice for stock cams would be some 248/256 cams out of a Galant 3.8 or Eclipse GTS.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
I'll probably go with the Galant 3.8 cams. I would love to get a set of some PRW cams, they are way to much out of my price range right now.
I've finally have some time to actually work on my XG350 intake manifold project.
I've been practicing my porting lately, so i decided to try my hand with the runners on the manifold. Don't mind the carbon build up deep inside the runners. Still need a longer sanding bit so I can clean them up.
[URL=http://s1088.photobucket.com/user/Jerry_Arnold/media/101_0017_zps876ae9b1.jpg.html][/aURL]
The XG350 manifold has valves inside it that open up when you reach a certain RPM. I decided to delete those because I felt they were not needed for my application.
All cleaned up
Going to have to make an actuator delete plate.
I just need to finish cleaning up the last section so I can polish everything and make it look nice.
My new valve cover that I'm going to have powder coated white and pearl red letters
Bookmarks