April 2nd 2019
Removed the tires and vehicle is on jack stands. Proceeded to buy a 32mm axle nut socket. Took the safety clip off and loosened it with a breaker bar. After doing so I hammered it a bit and it came out. Then I loosened the shock assembly to hub bolts which size is 24mm socket . After loosening the 2 I let the hub down and started to remove the axle by prying it with two flat head screwdrivers on the ends. Covered the spline opening with some shop towels that way it won’t get dirt inside. The strut tower nut size are 14mm as well. Slowly but surely the project is coming together. Stay tuned.
Sent from my iPhone using Tapatalk
Bookmarks