The Galant Center - Powered by vBulletin

Thread: No Spark at coils

Showing results 1 to 6 of 6
  1. #1

    No Spark at coils

    I've got an 03 2.4. My ballance shaft belt broke and destroyed the crank sensor and plate. I replace both belts the crank sensor and plate. Got it back together and it only runs on 2 cylinders. One coil hAs spark but the other one has no spark. I then replaced the bad coil with same results. Only one coil has spark.
    I then went back and checked all my work and decided to replace the crankshaft position sensor with another new one.
    Now neither coil has spark.
    When only one coil had spark the engine would run, but only on 2 cylinders.
    What can cause it to loose both coils?
    Please help

  2. #2
    Anybody out there got any help on this?

  3. #3
    Your spark plugs. Re check the way the wires connect to the coil packs. They only go 1 way but are easy to mix up.


    Sent from my iPhone using Tapatalk

    2kGblackONblack4g64

  4. #4
    Quote Originally Posted by 00LeibyRacing View Post
    Your spark plugs. Re check the way the wires connect to the coil packs. They only go 1 way but are easy to mix up.


    Sent from my iPhone using Tapatalk
    Man I've checked and checked and rechecked. This car is proving that I must not be as good of a mechanis as though I was.
    There must not be many gurus on this page as your the only one to respond to my question.
    By the way thank you.

  5. #5
    Take a picture of your plugs to coils....


    Sent from my iPhone using Tapatalk

    2kGblackONblack4g64

  6. #6
    Quote Originally Posted by 00LeibyRacing View Post
    Take a picture of your plugs to coils....


    Sent from my iPhone using Tapatalk
    Ok I will after dinner

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •