momo shifter

[galantv600]

aight gents and females... i did a search but didnt find anything on this.. i guess the search isnt runnin good... anywho how much work will be needed to fit this shifter on?

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33703 ('http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2445137226&category=33703')


spank ya for the help 8)

[yofadahead]

it's an automatic shifter, so i don't think you should have that much trouble...

[Alexey]

I'm looking at one of those myself, let me know how the fit is when you get it.

[galantv600]

i still havent bought it and wont until someone can hook me up wit details of hookin it up...

[escoson]

when you take the stock shifter off you will see the white piece inside the shaft is on a angle due to the side button of the oem shifter. you have to cut the notch off so its level. after you do that put it on adn see if it fits and shifts properly. you mite have to do this a few times cutting off a little bit each time until it gets just perfect.

[pinoyesv6]

i dunno what the shipping is at options but they have it for 102 http://www.optauto.com/webstore/product_li...=1646&last=1646 ('http://www.optauto.com/webstore/product_list.asp?dept=1646&last=1646')

[galantv600]

thanks a lot for the explantation guys!! it was wat i thought was needed to do... can i also cut the plastic so the shifrter sits lower cuz if i just cut the plastci piece off the side itd be sittin high... i also would put a boot on it but thats another story 8) yeah i already found a webiste wit momo parts... http://www.ltbmotorsport.com/automatic.html ('http://www.ltbmotorsport.com/automatic.html') thanks a lot again guys!!!

[Alexey]

i also would put a boot on it but thats another story 8)

Are you getting the MOMO boot too ? They have nice ones to match the shifter. I wish they had those shifter/boot combinations for us, automatic guys too. So far, only for sticks :cry:

[galantv600]

well since i have the Ractice E brake kit thing i wanna get the black/silver shifter wit the boot or maybe just the silver one wit the black boot to match the e brake...since its black wit silver.... i dunno!!! i have the bezel in aluminum and painted the trim pieces black..

[rodt0331]

that is the same shift knob that i have check it out

http://images.cardomain.com/member_images/11/web/383000-383999/383615_20_full.jpg

http://images.cardomain.com/member_images/11/web/383000-383999/383615_22_full.jpg

[rodt0331]

that is the same shift knob that i have check it out

http://images.cardomain.com/member_images/11/web/383000-383999/383615_20_full.jpg

http://images.cardomain.com/member_images/11/web/383000-383999/383615_22_full.jpg

it was pretty easy to install just make sure you dont cut the white piece too much cause then the shift bottom will not work properly you'll be able to change gears without pushing it.. and that is a bad thing

[galantv600]

see u got the basic design i want.,.. all matchign.. but i dont like the boot that comes on the ractive.... i rather get a momo or somethin like that

[TheRealDeal]

Yeah I rather go with the momo to bro. I'm thinking bout getting one for my g too

[Ritalin Kid]

I'll admit that shifter is nicce but damn.. 120 bones for a shifter knob.. Is there any place where you can buy a cheaper generic version of this shifter?

[atx]

can u cut down the hight of the shifter? i dontl the top button shifters cause they look so tall can u make it like a inch shorter?

[J]

<div class='quotetop'>QUOTE(atx)</div><div class='quotemain'>can u cut down the hight of the shifter? i dontl the top button shifters cause they look so tall can u make it like a inch shorter?</div>

the shifter is sitting on that white plastic piece inside.

you can cut the white plastic down lower and lower until it's the height you want it, then the shifter sits lower.

just take a little off the top and gradually move downwards.

there's a lot of plastic piece under there. you could take off a good chunk without any problem. just don't go too low where you can't push it down anymore.

[galantv600]

andu gotta remeber that when u go from Park to L... the shifter gets lower too... so u need some space to be able to shift all the way to L if ya ever do./... 8)

[keyser]

I'm thinking about getting this one,
http://www.motorshop.nu/shop/style/extra/b.../F16evo-car.jpg ('http://www.motorshop.nu/shop/style/extra/bilder/F16evo-car.jpg')
Even though a round knob is "faster"

[galantv600]

but its manual tranny... :?

[keyser]

<div class='quotetop'>QUOTE(galantv600)</div><div class='quotemain'>but its manual tranny... Â*:?</div>
And so is my car https://www.thegalantcenter.org/style_emoticons/default/smile.gif
http://images.cardomain.com/member_images/...8750_3_full.jpg ('http://images.cardomain.com/member_images/4/web/328000-328999/328750_3_full.jpg')

[pinoyesv6]

<div class='quotetop'>QUOTE(galantv600)</div><div class='quotemain'>but its manual tranny... Â*:?</div>

so...with a lil fabrication, you can use a manual tranny knob in an automatic...

[Alexey]

Damn, rodt0331's interior looks tight. Love the shifter/ebrake combination. By the way, how did you make the headlights dark like that ? Not some kinda tape that you put over the headlights, huh ?

[rodt0331]

<div class='quotetop'>QUOTE(Alexey)</div><div class='quotemain'>Damn, rodt0331's interior looks tight. Love the shifter/ebrake combination. By the way, how did you make the headlights dark like that ? Not some kinda tape that you put over the headlights, huh ?</div>


THANKS

Are you talking about this?

http://images.cardomain.com/member_images/11/web/383000-383999/383615_11_full.jpg

cause that is just the GTO CF headlight covers...which by the way im selling if you are interested....the only thing that i did to them i took off that GTO sticker cause i dont like stickers on my car but if you look closely you can tell that the GTO sticker used to be there...