JDM 1 piece headlights and JDM side markers

[josh_877]

I just wanted to know if the 1 piece JDM headlights fit and with what kind of mods? is it harder than the 2 piece? And for the side markers, how can i clear them, and how do i measure where to put them?

[gottmanMR]

I just wanted to know if the 1 piece JDM headlights fit and with what kind of mods? is it harder than the 2 piece? And for the side markers, how can i clear them, and how do i measure where to put them?

Yeah the 1pc jdms will fit fine, just gotta rewire the headlights. Jdms use different bulbs and corner lights are funtional turn signals, instead of parking lights. You won't be able to clear the side markers, might as well get some after market clear ones instead, cheaper too. You gotta look at vr6's 7g and estimate where you wanna put em.

[josh_877]

I just wanted to know if the 1 piece JDM headlights fit and with what kind of mods? is it harder than the 2 piece? And for the side markers, how can i clear them, and how do i measure where to put them?

Yeah the 1pc jdms will fit fine, just gotta rewire the headlights. Jdms use different bulbs and corner lights are funtional turn signals, instead of parking lights. You won't be able to clear the side markers, might as well get some after market clear ones instead, cheaper too. You gotta look at vr6's 7g and estimate where you wanna put em.

How bout the cutting though? what will i have to cut? and what tools will i need?

[brandon]

For the headlights you have to cut down the bumper supports... I used a hacksaw.

As for the sidemarkers, you'll have to drill a hole of course, and then run the wires.

[gottmanMR]

How bout the cutting though? what will i have to cut? and what tools will i need?[/quote]

Sorry forgot about the cutting, install the headlights in place, then approximate how much is needed to be cut off the bumper support when you slide it back on. Two slits need to be made where the bumper support meets the headlights. Yeah any good cutting tool will do, as long as it gets the job done, I used an electric saw. Good luck, have fun.

[eu4ia]

hey guys im new here at the moment i have a gen6 as my standard and im gonna buy a gen 7 .. umm im in australia as well just to let you know so ill have the 5 door hatch version anyway .. thats not the point the opint im asking is does anyone have address where i can get information on purchasing the 1 peice JDM aftermarket front lights

thanks
mike

[8ggalant]

i can get information on purchasing the 1 peice JDM aftermarket front lights

thanks
mike

i thought those came on the jdm/worldspec 7g's already? im not positive tho so dont quote me

[eu4ia]

well i don't care where i get them from .. the states , new zealand , japan .. hell australia if im lucky .. i just like info on them since i need to start getting all my info ready to buy stuff soon .. because my g7 project will start in the newxt few months

[Blue Ice]

i would think that if you have a 5 door 7gen galant, you probably already have the JDM headlights. i thought they came standard on every galant in the world except the North American 7gen galant.
Are your headlights plastic or glass?
Now if you want USDM headlights, i'm sure there's someone on this board somewhere who will love to trade with you. https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

[8ggalant]

i would think that if you have a 5 door 7gen galant, you probably already have the JDM headlights. i thought they came standard on every galant in the world except the North American 7gen galant.


that was exactly my point

[eu4ia]

as you can see

http://www.m-cgi.com/euphoria/galant/9401.jpg

they arn't the same lights on the stock galant

[gottmanMR]

those are the 2 piece glass headlights...and damn does that g look good

[eu4ia]

yeah i know she does i was tempted on buying her but i though since im gonna rip the one i buy apart and re build her from the ground up i didn't really see much use on spending 7 grand on a car im just gonna rip apart

[SamirDarji]

as you can see

http://www.m-cgi.com/euphoria/galant/9401.jpg

they arn't the same lights on the stock galant
Damn that's clean. Looks like a freakin' BMW. Where do we get that front bumper?

[eu4ia]

the front bumper is stock on the top of the line 94 model 5 door hatch editon

i think its the same as the one at

http://www.ozeparts.com.au/ ('http://www.ozeparts.com.au/')

search under this
Mitsubishi Galant 1993-97 HJ 5Door Hatch

[SamirDarji]

Awesome! Thanks dude! I'm thinking this might look sweet state-side as well. Anyone done this front conversion yet?