8G Comparable Front Lip Kits

[Kalamidad]

i did a search and came up empty...i'm sure it was discussed at one point or another...but here is goes.

What front lip would fit the stock 99-01 bumper with no or some modification? I'm talking about lips from other cars.

I'm not a fan of the VR-4 lip without a JDM Bumper. and i don't have the money to import one so, i'm looking for alternatives.

I'm thinking that the dimensions from the 96 Maxima might fit. Has anyone tried fitting a lip from another car on the galant? Two peice Lip Kits would work also.
I'm looking for EDUCATED SUGGESTIONS, not just lip kits that you think look hot.

I'm gonna be doing some research on this but would appreciate your input as well.


LIPS THAT SEEM TO FIT

99-01 Bumpers
-2000 Civic front Lip (requires extending)
http://img236.exs.cx/img236/3557/picture0154oy.th.jpg

99-01 Integra Type-R half bumper
http://img163.imageshack.us/img163/2968/mygalant06dz1.jpg

1999-2000 Integra Mugen Front Lip (requires trimming)
http://memimage.cardomain.com/member_images/6/web/402000-402999/402847_270.jpg http://memimage.cardomain.com/member_images/6/web/402000-402999/402847_271.jpg

^^^^^TUTORIAL^^^^^ (https://www.thegalantcenter.org/showthread.php?t=18213&highlight=mugen+lip+install)

02-03 Bumpers
-Mugen Civic 99-00 front lip (requires extending)
http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-27DCP_1700s.jpg http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-03-1721-59-37DCP_1727s.jpg
The Thread To ^^^^THIS^^^^ Install. ('https://www.thegalantcenter.org/viewtopic.php?t=34877&start=0')

-JDM VRG LIP
http://i9.photobucket.com/albums/a84/hakkeshou/UnderConstruction.jpg

Related Links

Related links have been lost. sorry.

https://www.thegalantcenter.org/viewt...t=43015&start=0 ('https://www.thegalantcenter.org/viewtopic.php?t=43015&start=0')

https://www.thegalantcenter.org/viewt...t=48636&start=0 ('https://www.thegalantcenter.org/viewtopic.php?t=48636&start=0')

https://www.thegalantcenter.org/viewt...t=48475&start=0 ('https://www.thegalantcenter.org/viewtopic.php?t=48475&start=0')

https://www.thegalantcenter.org/viewt...light=mugen+lip ('https://www.thegalantcenter.org/viewtopic.php?t=47996&highlight=mugen+lip')

https://www.thegalantcenter.org/viewt...light=mugen+lip ('https://www.thegalantcenter.org/viewtopic.php?t=47193&highlight=mugen+lip')

https://www.thegalantcenter.org/viewt...t=43138&start=0 ('https://www.thegalantcenter.org/viewtopic.php?t=43138&start=0')

https://www.thegalantcenter.org/viewt...light=mugen+lip ('https://www.thegalantcenter.org/viewtopic.php?t=46942&highlight=mugen+lip')

https://www.thegalantcenter.org/viewt...t=46372&start=0 ('https://www.thegalantcenter.org/viewtopic.php?t=46372&start=0')

https://www.thegalantcenter.org/viewt...light=mugen+lip ('https://www.thegalantcenter.org/viewtopic.php?t=45113&highlight=mugen+lip')

https://www.thegalantcenter.org/viewt...p=505383#505383 ('https://www.thegalantcenter.org/viewtopic.php?p=505383#505383')

Any question you have should be answered in one of those links listed above. Or you can ask them there so that we have all the info together.


b]STOP STARTING THREADS ABOUT THIS PLEASE!!![/b]
LIPS That Don't Seem To Fit Well.
'99 - 01 Bumper




'02-'03 Bumper
Civic 92-95
Civic 96-98
Civic 01
Accord 98-00
Integra 98-01

where to get these lips

Search Ebay Motors www.ebaymotors.com
For starters
99-01 8g
Type: " 94 97 99 Integra Front Lip"

02-03 8g
Type: "99 01 Civic Front Lip"

[cardude03]

have you seen the lip from earcings? made for the galant, not the VR4 one?

http://www.eracings.com/catalog/product_in...galant-20022003 ('http://www.eracings.com/catalog/product_info.php?pName=speedz-urethane-lip-kit-mitsubishi-galant-20022003')

[Z]

<div class='quotetop'>QUOTE(Kalamidad)</div><div class='quotemain'>i did a search and came up empty...i'm sure it was discussed at one point or another...but here is goes. Â*

What front lip would fit the stock 99-01 bumper with no or some modification? I'm talking about lips from other cars. Â*

I'm not a fan of the VR-4 lip without a JDM Bumper. and i don't have the money to import one so, i'm looking for alternatives. Â*

I'm thinking that the dimensions from the 96 Maxima might fit. Has anyone tried fitting a lip from another car on the galant? Two peice Lip Kits would work also.
I'm looking for EDUCATED SUGGESTIONS, not just lip kits that you think look hot. Â*

I'm gonna be doing some research on this but would appreciate your input as well.</div>
i had the chance to mess with an lude's front bumper. shape wise and everything it was a close match......it wasnt the last gen prelude it was the one before the last. you might wanna look into it......

i know for a fact, that the 8g cyber/initial V front gets sectioned in the middle and put back togheter and sold to cavalier owners.....i dunno if you could take a cavalier front lip, and stretch it

personally, i'm getting tired of the front i got, planning on going back to stock and making a lip provably from scratch or another cars

[Z]

<div class='quotetop'>QUOTE(cardude03)</div><div class='quotemain'>have you seen the lip from earcings? made for the galant, not Â*the VR4 one?

http://www.eracings.com/catalog/product_info.php?pName=speedz-urethane-lip-kit-mitsubishi-galant-20022003</div>


sorry to disappoint you but that lip never got made, atleast not to my knowledge

[Z]

and it was only for the 02-03

[cardude03]

oh, okay, sorry guys.

[Z]

<div class='quotetop'>QUOTE(cardude03)</div><div class='quotemain'>oh, okay, sorry guys.</div>

its coo, i was gonna drop by last friday to pick up a new front but i'm gonna be using the money for an alarm..................

if you want i can call them up to see if they ever made that lip

[Kalamidad]

Thanks Guys...


Z..i'll look into cavalier lips and post my findings here.

[DryBear]

FYI, I was at this tuner shop today and they had a bunch of ABS front lips out - I asked if I could try them out on my car and they obliged. Here are the results - bear in mind that I have an 02-03 bumper and the results may be different for the 99-01 bumper:

Doesn't Fit:
Civic 92-95
Civic 96-98
Civic 01
Accord 98-00
Integra 98-01

I did fint one that actually fit pretty well - it was a Mugen Civic 99-00 front lip. The contours matched pretty well along the curves of the bumper, but it came up several inches short on the sides. It does look like it will fit well as long as you extend the sides.

http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-27DCP_1700s.jpg
http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-41DCP_1701s.jpg
http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-53DCP_1702s.jpg

[neel9]

damm u the man.. doing some research in the sence of a lip.. i just wanna get a front lip for my galant.. thats all i want.. so.... i wondering is an 98-00 accord one wil fit..?

[DryBear]

damm u the man.. doing some research in the sence of a lip.. i just wanna get a front lip for my galant.. thats all i want.. so.... i wondering is an 98-00 accord one wil fit..?

No, the 98-00 accord lip didn't fit very well - I didn't have my camera handy otherwise I would have taken a shot of how each lip looked on my bumper.

Heres a pic of the 99-00 Civic Lip from google:
http://www.allbodykits.com/9900civiccarbonLips800.jpg

I've been wanting a front lip for the longest time, but wasn't happy with the look of the eracings one and we know the story with erac1ngs :roll:

[neel9]

hey same here i have been looking for it but eracing i never considered as they do not sell it in california.. but yea.. if at all some ones get the 99-00.. what about the part where they have to be screwed in where it is short.. i am wonderig.. what could be done..

[pinoyesv6]

ahhh! you're making me think about buying my civic bumper back!!
http://img.photobucket.com/albums/v298/pin...v6/DSCN0531.jpg ('http://img.photobucket.com/albums/v298/pinoyesv6/DSCN0531.jpg')

[neel9]

ye it seems it will fit but not sure if the bumper.. will look good...my brother had the skyline fron on his 98 civ. looks sweet

[Kalamidad]

Z.. I realized that they can do that with the Cavalier because the mounts are in the right places...but that's a body kit...i want a lip.

Piony...That's actually a really good fit. I think that can be easily extended. I'd paint the lip anyways i have no use for the carbon fiber look. But talking about CF. Couldn't a person that knows how to work with CF extend that lip with no problem?

I'll run a list of Lips that seem to fit.

Thanks a lot you guys.

[pinoyesv6]

if you plan to extend the lip with CF and leave the CF pattern showing then its gonna be pretty tricky because you will have to rewrap most of the lip in CF if you want the piece to look like it was made in 1 piece and not extended. but if you paint over it, no problem.

[Kalamidad]

hey same here i have been looking for it but eracing i never considered as they do not sell it in california.. but yea.. if at all some ones get the 99-00.. what about the part where they have to be screwed in where it is short.. i am wonderig.. what could be done..

Neel, that's not a big problem...you can screw it where ever the screw holes are at...just drill the holes into your bumper, Some lipkits don't even use Screws, just two sided tape. If you are painting the Lip, Like i am, you can screw in at any point you want and just cover the head of the screw with body filler or something like that and then paint.

[neel9]

hey did u alrady buy it.. if yes.. let me know.. how it looks . post more pics so that i can see ur car.. hey by the way i have 2000 galant .. will it fit mine.. urs is like 2002 or something right?

[neel9]

i did a search and came up empty...i'm sure it was discussed at one point or another...but here is goes.

What front lip would fit the stock 99-01 bumper with no or some modification? I'm talking about lips from other cars.

I'm not a fan of the VR-4 lip without a JDM Bumper. and i don't have the money to import one so, i'm looking for alternatives.

I'm thinking that the dimensions from the 96 Maxima might fit. Has anyone tried fitting a lip from another car on the galant? Two peice Lip Kits would work also.
I'm looking for EDUCATED SUGGESTIONS, not just lip kits that you think look hot.

I'm gonna be doing some research on this but would appreciate your input as well.
i had the chance to mess with an lude's front bumper. shape wise and everything it was a close match......it wasnt the last gen prelude it was the one before the last. you might wanna look into it......

i know for a fact, that the 8g cyber/initial V front gets sectioned in the middle and put back togheter and sold to cavalier owners.....i dunno if you could take a cavalier front lip, and stretch it

personally, i'm getting tired of the front i got, planning on going back to stock and making a lip provably from scratch or another cars


i think the 92 prelude like u said might fit and they will be long not sure baout the curves but.. .. man damm now tht this topic has been brought up i am all searching for 99-00 lips.. assume that we buy that lip.. it will look wack as its not long enough dont u think.. any one has any idea to how to make it look long?? lol

[neel9]

dude.... dammm if u leave the lip looks sweet.. looks JDM.. shitt.. nice asss pic.
http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-27DCP_1700s.jpg

[DryBear]

Yeah, I bought the lip and it is just regular ABS, not carbon fiber (the other pic is just for illustration). I already have plans to extend it on the sides and fiberglass the gap. And my car is a 2003.

If anyone in the San Francisco area with a 99-01 galant and stock bumper wants to try different lips, let me know.

[Z]

bastards, now i got to go look for a 99-01 stock front and grill and lip :evil:

[pinoyesv6]

im already a step ahead of u Z. i have the front end. which is already customized. but more importantly i do have a spare bumper that i can use to mold off of for little to no downtime on my car. i should be getting a lip soon. im going to hit the yard up this weekend maybe or if that doesn't work, i know i can defintely get one for cheap at CSI. https://www.thegalantcenter.org/style_emoticons/default/tongue.gif

[neel9]

my friend just traded his 2001 civ for a tsx.. and he has all his body shit so.. he told me to try to fit his jdm lip.. so tonite is the nite to do it.. willl let u know how it goes.. by the way wanderinpinoy.. i am in LA.. so.. if ur projet works with the extensions of the lips and u can make it happen .. let me know.. i will just pay to make mine .. lol.. if its cool

[neel9]

hey wanderingpinoy.. i did try the lip but his car was a 2002 civic.. and it will fit to.. but like urs short.. so.. i am going to get it painted and may be trim the upper part so that it hold inside the grill part.. but i am not sue what to do with the endss.. let me know if u have any idea.. ?

[Kalamidad]

Neel, post pics like Piony did...Share the wealth.

[neel9]

hey sorry but i did nto have my camera.. but hey .. if i get a chance i will go to his house and take some pics.. ..may be i will be installing it this weekened but not sure if i should as i do nto know what to do with the edges. so..

[Kalamidad]

Neel, I don't know how you are doing financially, but a shop should not charge you more than a 303 to extend it and paint it for you.


Please try to take pictures so i can add it to the list, even if not painted...like Piony did.

[bglocc]

What about this lip for the Audi S4 ('http://www.lltek.com/S4_8E_UH_titan.htm')
http://www.lltek.com/PRS_bin/UHS48E/S4_8E_UH_straigth-on_ZZ.jpg
I've been looking at it for a couple of weeks now, and it looks like it would line up pretty good on the '99-'01 bumper. What do ya'll think.

[Stunner 2]

Wow that lip looks hot, where can i get it I am really good with fiberglass.

[bglocc]

LLTEK ('http://www.lltek.com/s4.htm')

[neel9]

does any on have any idea or extending lips??? i am doin mine but side are short so.. please... help.

[pinoyesv6]

if you odn't know how to fiberglass. leave it to the shops to do..

[Stunner 2]

I suggest cutting the ends about 3 inches from end and extend from there were you need it to be. I am also going to try this but I am adding some more detail to the ends maybe a small wing or a connection to the top of the bumper. I saw some pics that PINOY had posted of some Jap spec galant lips. Pinoy could you post those here for us

[neel9]

where did he post themm?.. and why u cutting the endds.. isnt it already short.. u need to add right not cut?

[neel9]

hey here is my install.. recommendations need to extend the lip.. for right now will go wit pinoyv6's advise.. go to wallmat andsee what they got.. here i the mine.. what do u guys say?
http://img8.exs.cx/img8/9341/picture0109iy.th.jpg ('http://img8.exs.cx/my.php?loc=img8&image=picture0109iy.jpg')

[pinoyesv6]

<div class='quotetop'>QUOTE(neel9)</div><div class='quotemain'>where did he post themm?.. and why u cutting the endds.. isnt it already short.. u need to add right not cut?</div>

yea take his advice. its easier to cut it like wanderingpinoy did and fill in the gap with fiberglass than it would be to just extend the ends. if you just extend the ends you have to worry about fabricating the ends and matching the contour. if you fill in the gap its a lil bit easier

[Lazarus]

Has anyone tried the 94-97 accord lip kits?

[Kalamidad]

<div class='quotetop'>QUOTE(Lazarus)</div><div class='quotemain'>Has anyone tried the 94-97 accord lip kits?</div>

No Not Yet. I'm having trouble finding shops here in NY that have Lips on stock...All the shops here say that those are special orders. I guess the demand here in NY is not as big as on the west or south.


[size=18]<span style='color:darkred'>NEEL, PLEASE POST A PIC OF THE ENTIRE BUMPER WITH THE LIP ON IT SO I CAN POST IT ON THE LIST.</span>

[neel9]

here is what i installed almost a week ago .. and guess what.. today i was taking my gf to dentist and front tires blew of an 18wheller and so.. the small rubber part hit my front and so the lip was broken.. i will post the pics of the broken lip but here is what it looks liked after modifications..
http://img236.exs.cx/img236/8139/picture0023vf.th.jpg ('http://img236.exs.cx/my.php?loc=img236&image=picture0023vf.jpg')
http://img236.exs.cx/img236/3520/picture0014cu.th.jpg ('http://img236.exs.cx/my.php?loc=img236&image=picture0014cu.jpg')
http://img236.exs.cx/img236/3557/picture0154oy.th.jpg ('http://img236.exs.cx/my.php?loc=img236&image=picture0154oy.jpg')

[neel9]

sucks its broken.. gotta get neww..dammm..

[jusmills]

if anyone wanted to try to get the mugen abs front...I found a site: $80 free shipping

http://www.streetstyler.com/9900CivicMugenLips2DR.htm ('http://www.streetstyler.com/9900CivicMugenLips2DR.htm')

I'll post this in the other thread too

[HeadAche]

neel is that the civic lip in those pics or the integra lip?

[neel9]

that is a civic lip but .. this lip was an old one.. friend of mine got it a year ago for his civc and did not install it.. now they have a newer version of the lip so.. i think the new one is not as flexible as this one.. any ways.. this one is already broken. https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif https://www.thegalantcenter.org/style_emoticons/default/biggrin.gif

[Kalamidad]

First page has been updated...if i'm missing any info let me know.

[unlimited6986]

what did they use to extend it i got a 02 so i ned the civic one but how and what did u use to etend and and whats the diff between the size of a 99 and the size of a 02?

[Kalamidad]

what did they use to extend it i got a 02 so i ned the civic one but how and what did u use to etend and and whats the diff between the size of a 99 and the size of a 02?

pinoy explains in on his thread, i don't have time to explain it right now, but he used the lip of a stock bumper to extend it.

[galant305]

hey , but i think the 1999-2000 Integra Mugen Front Lip could fit to 02 G, or not :roll:

[Kalamidad]

with some modification...yes.

[Kalamidad]

<span style='color:red'>MOVED IN FROM ANOTHER THREAD...</span>






would the 98-01 type-r lip require the same mod to fit the 8g i have an 02 and i cant decide from type-r or mugen lip, i was thinkin the type-r since i havent seen anyone with it on there 02...

no one has done it but you're welcome to try...it's be interesting to see. do you know if its the same size as the mugen lenght wise?

http://www.horsepowerfreaks.com/images/products/Comptech/Front_Lip_Spoilers_Type_R.jpg

i don't know it the mouth will match that of the galant bumper. If it does, being how the mugen lip matches the type R should match too.

Pinoy used a civic lip which is a different bumper and most likely a different length. Since the Integra mugen lip is long enough, i would assume that it's the same case with the Type R. As for the length of the 02 bumper, i'm confident that it would fit. you just have to make sure to screw it down to make sure it's not going anywhere. As many screws as you dare, if you keep the lip black, use black screws so they are not noticeable, if you're gonna color match, it doesn't matter. If i remember correctly, Pinoy was holding his down with Two sided tape and very few screws, if any. I think i remember him saying, "I'll secure it later" and never did.

[Kalamidad]

FYI, I was at this tuner shop today and they had a bunch of ABS front lips out - I asked if I could try them out on my car and they obliged. Here are the results - bear in mind that I have an 02-03 bumper and the results may be different for the 99-01 bumper:

Doesn't Fit:
Civic 92-95
Civic 96-98
Civic 01
Accord 98-00
<span style='font-size:25pt;line-height:100%'>Integra 98-01</span>

I did fint one that actually fit pretty well - it was a Mugen Civic 99-00 front lip. The contours matched pretty well along the curves of the bumper, but it came up several inches short on the sides. It does look like it will fit well as long as you extend the sides.


Pinoy, Did the mouth on the integra lip match? I think that's the most important peice. Because the curvature of the lip itself can be resolved with the heat gun.

[DryBear]

FYI, I was at this tuner shop today and they had a bunch of ABS front lips out - I asked if I could try them out on my car and they obliged. Here are the results - bear in mind that I have an 02-03 bumper and the results may be different for the 99-01 bumper:

Doesn't Fit:
Civic 92-95
Civic 96-98
Civic 01
Accord 98-00
<span style='font-size:25pt;line-height:100%'>Integra 98-01</span>

I did fint one that actually fit pretty well - it was a Mugen Civic 99-00 front lip. The contours matched pretty well along the curves of the bumper, but it came up several inches short on the sides. It does look like it will fit well as long as you extend the sides.


Pinoy, Did the mouth on the integra lip match? I think that's the most important peice. Because the curvature of the lip itself can be resolved with the heat gun.

If I recall correctly, the mouth part did fit, but the difference was the curvature - the civic pretty much matched the curve of the 02-03 bumper perfectly. The integra lip was a bit off, and more angled. I'm thinking of going back and trying out an integra lip again.

[G-spot]

OK, so I went a little ballistic, lol https://www.thegalantcenter.org/style_emoticons/default/laugh.gif . It's just the same question being asked over again. Just ask me,SillyAsian, Neel9, ChuloMxcn and few others what they've done. We already know that the 99-01 bumper fit well minus the heat trim with the 1999 Mugen Integra lip, so that's final. As for the 02-03 bumper, I think it was Wandering_Pinoy and my previous project were the only ones that somewhat succesful. Here a quote from Pinoy a year ago:

Doesn't Fit: 2002-2003 Bumper
Civic 92-95
Civic 96-98
Accord 98-00
Integra 98-01

I did find one that actually fit pretty well - it was a Mugen Civic 99-00 front lip. The contours matched pretty well along the curves of the bumper, but it came up several inches short on the sides. It does look like it will fit well as long as you extend the sides.

Extend the sides meaning adding more plastic (melted polyurethane) to gap the existing lip. This is not a DIY thing if it's your first time doing. Took me 2 weeks to get it flushed and it looked fine. I think that was the message I was trying to say but got emotional along the way.

[Kalamidad]

OK, so I went a little ballistic, lol https://www.thegalantcenter.org/style_emoticons/default/laugh.gif . It's just the same question being asked over again. Just ask me,SillyAsian, Neel9, ChuloMxcn and few others what they've done. We already know that the 99-01 bumper fit well minus the heat trim with the 1999 Mugen Integra lip, so that's final. As for the 02-03 bumper, I think it was Wandering_Pinoy and my previous project were the only ones that somewhat succesful. Here a quote from Pinoy a year ago:

Doesn't Fit: 2002-2003 Bumper
Civic 92-95
Civic 96-98
Accord 98-00
Integra 98-01

I did find one that actually fit pretty well - it was a Mugen Civic 99-00 front lip. The contours matched pretty well along the curves of the bumper, but it came up several inches short on the sides. It does look like it will fit well as long as you extend the sides.

Extend the sides meaning adding more plastic (melted polyurethane) to gap the existing lip. This is not a DIY thing if it's your first time doing. Took me 2 weeks to get it flushed and it looked fine. I think that was the message I was trying to say but got emotional along the way.

well, pete, the reason why i asked Pinoy that question is because if the mouth fits, the curvature can be corrected with the heat gun. Since the integra lip is longer than the civic...the integra might work on the 02-03 bumper. as might all the ones that pinoy say would not fit...it's all about the mouth and the length of the lip, the curvature will be corrected.

[G-spot]

I wish we could experiment but now our option is kind of llimited since Phil no longer use his 03 as a guinea pig and Chad is using my civic lip as an "add on". We gotta find another 02-03 in the area pronto. :8G:

[Kalamidad]

It would be cool to have a couple of guys try out different lips other than what's proven to work. Think about the recognition!!!


BTW, updated first post.

[o1naturalhigh]

can anyone make a list for the 99-01? a list of "does fit"

[Kalamidad]

<div class='quotetop'>QUOTE(o1naturalhigh)</div><div class='quotemain'>can anyone make a list for the 99-01? Â*a list of "does fit"</div>
not too much info on that, but done.

[o1naturalhigh]

hey...has anyone asked a person who owns a 99-01 integra/civic what other lips fit their cars?? just a thought.

[00'WHITE]

where can i find 99-01 Integra Type-R lip kit? and will it fit on 2000?

[Kalamidad]

where can i find 99-01 Integra Type-R lip kit? and will it fit on 2000?

Question has been answered multiple times in different ways. Please refer to the link on the first post and READ.

[G-spot]

lock it and no more recycled question.

[Kalamidad]

<div class='quotetop'>QUOTE(G-spot)</div><div class='quotemain'>lock it Â*and no more recycled question.</div>

bad idea. I'm not a mod and would not be able to update the first post with new info.

[G-spot]

true

[00&#39;WHITE]

where can i find 99-01 Integra Type-R lip kit? and will it fit on 2000?

hey does this pics are the same kit?

[malicious]

man that integra type r lip looks sick .. .fit right on there?

[pinoyesv6]

hey does this pics are the same kit?

those are different. the first one is a lip. the one on the second pic is a half bumper.

[00&#39;WHITE]

those are different. the first one is a lip. the one on the second pic is a half bumper.

where can i get the half bumper at?

[pinoyesv6]

where can i get the half bumper at?

the guy with that black galant with the half bumper bought his half lip, installed by me. i got my half bumper and his from some guy in NY. i'd tell you who it was but i totally forgot who it was.

[AVERAGE]

Pinoyesv6, you wouldn't happen to have the link for DryBears' install? The search function hasn't been cooperating lately...

[SkylineG1]

Now when I need this the links don't work.

[pinoyesv6]

you don't need freakin directions. you just put the lip up to your bumper, cut where you need, bend where u need to lip.

i screwed the ends down to the bumper near the wheel and the middle of the lip is held in with double stick tape.

[SkylineG1]

I really didn't need it but I like to read up on things such as this to see how some people did theirs.

Oh yeah & a Type R lip from a 1994 Interga can work on a 99-01 G.

[8G_GTZ]

do you have a pic for a approval Skyline?

[The F.B.I]

there is a guy on ebay sellin some 99-00 civic mugen lips for 75shipped... i might get on and fuck with my stk bumper sitting in my room... i hope he'll let me pick it up eh oh well just throwin it out there....

[Calipso]

where can i get the half bumper at?


Having difficulty myself finding this same bumper. eBay doesn't seem to have any, and nor do any of the Integra boards I visit.

Found this site though:

http://www.streetstyler.com/IntegraTypeRLipSpoilers.htm

[furiousgtz]

Having difficulty myself finding this same bumper. eBay doesn't seem to have any, and nor do any of the Integra boards I visit.

me too i think it would look good on galant.

[Xrs2]

99-01 Integra Type-R half bumper

Has anyone tried to install the Type-R half bumper on the 02+ cars. It should fit right? And if it doesn't fit hit it with a hammer than I guess.

I most worried about extending it, because I'm lazy.

[Calipso]

99-01 Integra Type-R half bumper

Has anyone tried to install the Type-R half bumper on the 02+ cars. It should fit right? And if it doesn't fit hit it with a hammer than I guess.

I most worried about extending it, because I'm lazy.


Did you find one? :evil:

[Xrs2]

Just the site you listed above.

edit, It is the 99-01 Integra Type-R front lip I was looking at. Looks close to the half bumper anyway. Same result differnt shit I guess.

[Calipso]

Just the site you listed above.

edit, It is the 99-01 Integra Type-R front lip I was looking at. Looks close to the half bumper anyway. Same result differnt shit I guess.


Yea, I'd like to know the EXACT one that the black 8G on the first page has. I think that is the best out of all the lips.

[Chevelle71_05]

So has anyone found the type-r half bumper or know if the "type-r lip" will work? I havent had any luck finding the 1/2 bumper!

[furiousgtz]

So has anyone found the type-r half bumper or know if the "type-r lip" will work? I havent had any luck finding the 1/2 bumper!

http://www.streetstyler.com/94-97integramugenfrontlip.htm this?

[pinoyesv6]

So has anyone found the type-r half bumper or know if the "type-r lip" will work? I havent had any luck finding the 1/2 bumper!

http://www.streetstyler.com/94-97integramugenfrontlip.htm this?

the mugen and type-r styles are different

[solofantasy]

Has anyone have experience or topics about Rear Lip selections?

[6G72gearhead]

I have a quick question and I'm a little short on time at the moment, but how well do you guys think a mugen style lip for a DC integra would hold up to cone strikes. I really like the look but dont want to put on something thats going to be easily damaged by cones.

[mattalicslvr8g02]

I have a quick question and I'm a little short on time at the moment, but how well do you guys think a mugen style lip for a DC integra would hold up to cone strikes. I really like the look but dont want to put on something thats going to be easily damaged by cones.

If you dont want dammage to the lip, go urathane

[6G72gearhead]

I have a quick question and I'm a little short on time at the moment, but how well do you guys think a mugen style lip for a DC integra would hold up to cone strikes. I really like the look but dont want to put on something thats going to be easily damaged by cones.

If you dont want dammage to the lip, go urathane
Thats what I've been thinking, but does it seem like the mounting locations will hold up, or the mods required to make it fit right withstand that kind of impact.

[mattalicslvr8g02]

I have a quick question and I'm a little short on time at the moment, but how well do you guys think a mugen style lip for a DC integra would hold up to cone strikes. I really like the look but dont want to put on something thats going to be easily damaged by cones.

If you dont want dammage to the lip, go urathane
Thats what I've been thinking, but does it seem like the mounting locations will hold up, or the mods required to make it fit right withstand that kind of impact.

where were you thinking of mounting it .... I would think in the wheel well screwed to the bumper(both sides) and in the middle grill

[6G72gearhead]

I may try and figure out how to add another mount below the foglight as well.

[letsrunem8]

wat about the rear?? wat lip kits can be used for that?

[fatal1]

none that will match to the front, unfortunatelly the only real options that we have are a full kit the front lip do something custom or the jdm setup, the closest look you can have to a full lip kit is how nelson c 's car looks where he has the mugen lip jdm sides and jdm rear

[letsrunem8]

wat about the mugen rear lip for the 98-01 integra?
http://www.streetstyler.com/98-01integratypermugenlipspoilers.htm

combo E

[Kenjuro_2]

So has anyone found the type-r half bumper or know if the "type-r lip" will work? I havent had any luck finding the 1/2 bumper!

http://www.streetstyler.com/94-97integramugenfrontlip.htm this?


The year that the first page shows is 98-01 for this lip.
this same website has it.

http://www.streetstyler.com/98-01integratypermugenlipspoilers.htm

I think I found my next MOD. :wink:

[Kalamidad]

Come back to life my child.


(Sorry guys, i'm setting up my thread library, so i gotta bring all these threads back. you'll all thank me at one point.)

[cruzintaz]

Does anyone know what kind of modifcation do you have to do for sliver galant with the front lip kit? And where can I find one?

[6G72Galant]

Come back to life my child.


(Sorry guys, i'm setting up my thread library, so i gotta bring all these threads back. you'll all thank me at one point.)

Thanks. But you should fix some of those links in the first page. And how about we start lookin into some rear lips that will fit the Galant?:cool:

[G-spot]

Does anyone know what kind of modifcation do you have to do for sliver galant with the front lip kit? And where can I find one?
uhhh..read first page?

[ShiZnitH]

Where can i get this lipp for my G8? Its from RalliArt but Mitsubishi Norway cant find the part number. Any1 seen this for sale or replica of this?
http://autoshow.permaisuri.com/Content/viewimage.asp?AutoID=20040928024914&Filename=53605.jpg

[G-spot]

That looks almost like VegasMatt's lip

[Kalamidad]

Thanks. But you should fix some of those links in the first page. And how about we start lookin into some rear lips that will fit the Galant?:cool:

A lot of threads were lost when we did the last switch. I'm guessing these where lost too.

I'll do it when i have a chance.

[G-spot]

***Super update***

Quit sending me pm's on where to get these lips

Search Ebay Motors www.ebaymotors.com
99-01 8g
Type: "99 Integra Front Lip"

02-03 8g
Type: "99 Civic Front Lip"

[6G72gearhead]

I've been working on mounting up my second one. I dont remember it being this much work.

[Kalamidad]

it really isn't a lot of work, are you doing something wrong?

[6G72gearhead]

Yeah, Im doing something wrong, I'm using hand tools because my dremal broke. It ist too much work it just takes more time than I have.

[G-spot]

**UPDATED** 8G COMPARABLE FRONT LIPS



What front lip would fit the stock 99-01 bumper or 02-03 with no or some modification? I'm talking about lips from other cars.

Has anyone tried fitting a lip from another car on the galant? Two peice Lip Kits would work also.
I'm looking for EDUCATED SUGGESTIONS, not just lip kits that you think look hot.

I'm gonna be doing some research on this but would appreciate your input as well.


LIPS THAT SEEM TO FIT

99-01 Bumpers
-2000 Civic front Lip (requires extending)
http://img236.exs.cx/img236/3557/picture0154oy.th.jpg

99-01 Integra Type-R Half Lip
http://img163.imageshack.us/img163/2968/mygalant06dz1.jpg

1998-2001 Integra Mugen Front Lip (requires trimming)
http://memimage.cardomain.net/member_images/6/web/402000-402999/402847_270.jpg http://memimage.cardomain.net/member_images/6/web/402000-402999/402847_271.jpg

1994-1997 Mugen Integra Half Bumper (95% fitment)
http://i70.photobucket.com/albums/i98/clubtgc/DSCN1546.jpg


^^^^^TUTORIAL^^^^^ (https://www.thegalantcenter.org/viewtopic.php?t=46574&start=0)

02-03 Bumpers

-Mugen Civic 99-00 front lip (requires extending)
http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-02-2823-15-27DCP_1700s.jpg http://img.photobucket.com/albums/v294/wanderingpinoy/FrontLip/2005-03-1721-59-37DCP_1727s.jpg
The Thread To ^^^^THIS^^^^ Install. (https://www.thegalantcenter.org/viewtopic.php?t=34877&start=0)


Related Links
https://www.thegalantcenter.org/showthread.php?t=24867
https://www.thegalantcenter.org/showthread.php?t=27957

Any question you have should be answered in one of those links listed above. Or you can ask them there so that we have all the info together.

Quit sending me pm's on where to get these lips

Search Ebay Motors www.ebaymotors.com (http://www.ebaymotors.com)
For starters
99-01 8g
Type: " 94 97 99 Integra Front Lip"

02-03 8g
Type: "99 01 Civic Front Lip"



STOP STARTING THREADS ABOUT THIS PLEASE!!!

LIPS That Don't Seem To Fit Well.
'99 - 01 Bumper
Civic 92-98
Accord 98-00


'02-'03 Bumper
Civic 92-95
Civic 96-98
Civic 01
Accord 98-00

[Armageddon Sunset]

would the integra type R lip 94-97 fit our cars? as any one tried this lip yet?
http://i3.photobucket.com/albums/y97/civic700/DSCF0821.jpg

[G-spot]

the bend on a 94-97 is shorter than a 98-01 but will still fit fine.

[Tizon]

anyone know if the evo 8 or 9 lip fits a jdm 8g vr4 prefacelift front? how much do i need to modd it to fitt?

[guynlidia2006]

anyone know a lip the will fit a 02 galant with out extending... thats beyond my knowledge

[RedGalant2k1]

The VRM and VRG lips fit 02-03s with some mods.

[Ivory8g]

The VRM and VRG lips fit 02-03s with some mods.

PROOF
*pointing down*
VVVVVV

[Xrs2]

Where can one get a "VRG Style" kit like that. Is trig the only option?

Or maybe a better Q, anyone got one for sale? PAish area?

[Ivory8g]

highly doubt anyone in the PA area has a lip for sale, and yes trigg is basically your best option or you can look on ebay but I can guarantee that it will be more expensive than trigg

[Kalamidad]

Cleaned up the first post a little. sorry about all the related links being no good anymore. They got lost in transition with all the changes here i suppose. but the bulk of the info is on this thread anyways.

[Kalamidad]

highly doubt anyone in the PA area has a lip for sale, and yes trigg is basically your best option or you can look on ebay but I can guarantee that it will be more expensive than trigg


that look really good. :)

[guynlidia2006]

02-03 8g
Type: "99 01 Civic Front Lip"

this fits withoutextendig?

[guynlidia2006]

http://cgi.ebay.com/ebaymotors/99-00-Civic-2-3-4DR-PU-Front-Bumper-Spoiler-Lip-TR-EK_W0QQitemZ230262583096QQcmdZViewItem?hash=item23 0262583096&

this is the one i want to buy.... shaving it down to fit is cool.. but i dont know how to extend it

[Ivory8g]

hah thanks man...I got the skirts painted so I am just waiting for the vr4 rear. dont mean to toot my own horn but ish is clean. vrg really isnt that to fit to the 8g-b front bumper :P

[platano]

is there a lip that will fit on my Old Style vr4 bumper?

[spardavr4]

is there a lip that will fit on my Old Style vr4 bumper?

This thread is about lip kits from other cars but the only one I know of is the Super VR4 lip kit which is extremely rare now. I'm still looking for one.

[galantgtz36]

where in the world can i buy that vrg lip?

[G-spot]

where in the world can i buy that vrg lip?
I could of sworn someone is selling the lip on the for sale thread right now.....


Search :smt018

[unclepaulie]

g'day all,

i own a 8g vr4 series 1,

and am searchin for a lip or something like an extension to go under the bumper (maybe like the 07 sti lips)


has anyone here done such a thing to the vr4 bumper? i know a lot of you blokes put lips on your stocko bumpers

[blue8g]

ummm the super vr4 lip or vogue lip i don't know which fits what but i know those lips are for the VR4.......talk to Cali he makes replicas.........

[beam514]

Super VR-4 lips are for the pre-facelift VR-4. The Vogue lip is for the facelift VR-4

[unclepaulie]

yeah i know the super lip, some of the fellas here in aust actually own super's lol

i meant like intergra lips or the rubber ones

[beam514]

well for us over here, the VR-4 bumper alone is hard enough to get, so we're not gonna ruin it with a lip for another car :)

[greddy]

I have a lip that should be arriving soon, it's my mystery lip although I"m pretty sure I figured out what car it came from, I'll post pics when I get it back

[unclepaulie]

well for us over here, the VR-4 bumper alone is hard enough to get, so we're not gonna ruin it with a lip for another car :)

hahaha i hear ya mate, USA really dipped out of that one

i was thinkin something similar to a nismo r34 gtr lower bumper lip

http://img265.imageshack.us/img265/2160/pict0049rg2.jpg

[2002BlackDragon]

So Greddy, what do you think the lip came off of? I love it and would love to see how it looks on a 2002.

[showtime]

greddy i would love to see how it looks on my car! lol

[stvn_mj]

Or I would like to see that home depot lip but probably made out of CF. I think that would be awesome.

[blue8g]

if a lip fits an ek would it fit our cars?

[bigvic]

ok so how much is an OK price for an extension for the 02-03 G mugen lip? I kinda dnt want it painted but then if i dnt itll look hella ugly wit the extra added 2 it rite?

[blue8g]

is there a specific seller to look for when buying an ebay mugen style lip? (so shipping isn't more than the lip itself)

[stvn_mj]

$70-80 bucks are the best deals i've seen. Just keep looking.

[AGalant]

hey wats up im lookin for a lip kit for my 02 galant.i want front, rear, and the sides.

[paflow]

Ebay dude...

[paflow]

Since I have an 02 I was looking on a whay to not use fiberglass to extend my front lip, keeping it flexible you know, doing a search on internet I get on to this: http://www.emisupply.com/catalog/norton-speedgrip-auto-line-flexible-parts-repair-epoxy-220ml-p-2242.html
I was thinking on get the plastic black garden fender from Home depot and glue it to have a nice smooth and flexible part. No one knows, does anyone have worked with this?

[Boosted]

hey wats up im lookin for a lip kit for my 02 galant.i want front, rear, and the sides.

Check with Cali or triggermauve. You can get a complete JDM lip kit. If you want just a front lip, you can use a Honda, BMW, or Evo lip.

[epicrock8g]

will this lip work
http://cgi.ebay.com/ebaymotors/94-97-ACURA-INTEGRA-DC2-PU-FRONT-BUMPER-LIP-SPOILER-99_W0QQitemZ270435536084QQcmdZViewItemQQptZMotors_ Car_Truck_Parts_Accessories?hash=item3ef736ccd4

[G-spot]

will this lip work
http://cgi.ebay.com/ebaymotors/94-97-ACURA-INTEGRA-DC2-PU-FRONT-BUMPER-LIP-SPOILER-99_W0QQitemZ270435536084QQcmdZViewItemQQptZMotors_ Car_Truck_Parts_Accessories?hash=item3ef736ccd4

yep, but prepare to do a little body work to fill the small gaps near the fog light housing.

[epicrock8g]

fill it in with what and how

[Armageddon Sunset]

bondo, sanding, and some fiberglass work to answer your question.

[epicrock8g]

ok thanks

[mtgraves2010]

I'm new to the site and was reading all the different lips out there. What is the best lip that will fit an 02 Galant with a stock bumper with the least modifications? Please name a few for me...

M.G.

[Bloody Arro]

This has been answered time and time again. You can get the Mugen lip and EXTEND it. There IS a guide, but I would rather YOU search for it instead of me taking the time and doing the work for you.

[Bloody Arro]

Also, you COULD get a bumper and grill from a 99-01 and get a Mugen lip and shorten it. Quite a bit easier on work towards the lip.

[OMEGA PHX]

I'm new to the site and was reading all the different lips out there. What is the best lip that will fit an 02 Galant with a stock bumper with the least modifications? Please name a few for me...

M.G.

Did you read the first page of this thread?
Cause it says that the Mugen Civic 99-00 front lip (requires extending) fits your bimper or the JDM VRG lip would fit but thats a hard one to find.

[Mike_ODell]

Did you read the first page of this thread?
Cause it says that the Mugen Civic 99-00 front lip (requires extending) fits your bimper or the JDM VRG lip would fit but thats a hard one to find.

lol...i didnt even bother to comment when i read what the dude asked earlier. Read the info and learn....still confused then ask.

[Bloody Arro]

On a random and OT note, I've nearly been on TGC for a year lol.

I do miss the GalantForums though..

[mtgraves2010]

Thanks, I will look into that one...

[mtgraves2010]

Did you read the first page of this thread?
Cause it says that the Mugen Civic 99-00 front lip (requires extending) fits your bimper or the JDM VRG lip would fit but thats a hard one to find.

Thanks...I will look into it. I read the threads eaerlier and was curious. Still thanks...

[beam514]

has anyone ever tried the Integra "Spoon" lip?

http://orangecounty.craigslist.org/pts/1934111573.html

I'm thinking about trying this

[G-spot]

It's a cross between a mugen and a type r lip so yeah it looks doable

EDIT: since we lost the Type R lip pics here's a recent project from me:
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3116.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3117.jpg
http://i70.photobucket.com/albums/i98/clubtgc/DSCN3118.jpg

[beam514]

yeah I'm thinking about going for it. I don't quite like the shape of the mugen lip, but I really like the Type-R lip. Type-R lip with mugen holes = win for me

[beam514]

I went ahead and bought that "Spoon" style lip for $60. I'll try to install it when I get back home.. though I don't have a heat gun. I guess a hairdryer might work?

[G-spot]

hair dryer is too weak it has to be around 175+ degrees minimum to soften abs

[blue8g]

I HATE Spoon parts...

[beam514]

well I hate how big your sig is :D
and hairdryers get pretty dang hot when it's close enough haha. I'll ask around though and see if anyone has a heat gun

[blue8g]

Haha I <3 my sig

[G-spot]

I LOVE to Spoon her parts...
Fixed :icon_lol: If this was the random thoughts thread it would of been perfect...

[blue8g]

Fixed :icon_lol: If this was the random thoughts thread it would of been perfect...

haha That is perfect in any thread

[beam514]

you guys are sick....



but she is 20 years old now! lol. I think I'd prefer Forking.

[blue8g]

mind out of the gutter you manwhore haha

[Corey2kG]

that type r lip is bad ass

[Rach3T8G]

i was gonna go for the mugen lip but i think im goin with the spoon lip now

[beam514]

pics for proof
The lip is made of polyurethane, not ABS, so it's pretty dang flexible. I might even be able to cut it with a multi-tool knife
http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/IMG_7010.jpg
http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/IMG_7013.jpg
and mounting brackets
http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/th_IMG_7012.jpg (http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/IMG_7012.jpg)

[Armageddon Sunset]

I wasnt even aware Spoon made a 'teg lip. Im interested in seeing how this turns out.

Im thinking about a Mazda 6 front lip and Ive seen a 2 piece front lip on the 01-06 Camry that might look good, kinda a S-VR4 look to it minus the holes.

[Kouki]

MK3 VW front lip, they come in 2 pieces, find an extra piece to extend the middle and VIOLA!

I made this lip for my 240sx, but its down and the galant needed a lip and I saw opportunity, it fit so it stays with the galant. It was sticker bombed before I put it on...

Before... you can see the ziptie stitching..
http://i264.photobucket.com/albums/ii192/autodrift/26774_424557046958_817291958_5266144_1516118_n.jpg

After bombing... (ignore the ill fitting body panels, they were removed constantly..)
http://i264.photobucket.com/albums/ii192/autodrift/34078_459753856958_817291958_6114651_1191346_n-1.jpg

On the Galant..
http://i264.photobucket.com/albums/ii192/autodrift/47429_486728396958_817291958_6803840_3070224_n.jpg
** Its important to note that the sides will fit perfectly, mine do not because I did not drill the holes yet in this picture for the end zipties to make it even.. It does sit evenly, more pictures soon.**

[beam514]

hmmm interesting Kouki

and I am officially done installing my Spoon lip

http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/th_IMG_7068.jpg (http://i215.photobucket.com/albums/cc141/beam514/Galant%20Photos/IMG_7068.jpg)

for references to my install process, go to these posts:
https://www.thegalantcenter.org/showpost.php?p=613678&postcount=348
https://www.thegalantcenter.org/showpost.php?p=613678&postcount=350
https://www.thegalantcenter.org/showpost.php?p=613678&postcount=367
https://www.thegalantcenter.org/showpost.php?p=613678&postcount=376
https://www.thegalantcenter.org/showpost.php?p=613678&postcount=379

or just go to page 18 of my project thread and go from there:
https://www.thegalantcenter.org/showthread.php?t=28559&page=18

EDIT: with the polyurethane, a hairdryer will work just fine to mold it. Maybe on the ends you could use a heat gun, but I still managed it with a hairdryer. Just try not to run it too long without giving it time to cool off. And don't use your wife's top-of-the-line hairdryer either. Don't wanna destroy it and then lose your marriage because of a car lip :P

[blue8g]

I wasnt even aware Spoon made a 'teg lip. Im interested in seeing how this turns out.

Im thinking about a Mazda 6 front lip and Ive seen a 2 piece front lip on the 01-06 Camry that might look good, kinda a S-VR4 look to it minus the holes.

That's not a real Spoon lip.....it'd be a lot more if was one....and it'd look like this:

http://spoonsportseurope.net/media/catalog/product/cache/1/image/82b59602b9fdb10dff000365f75c373c/7/1/71110-dcr-000_2.jpg

[Armageddon Sunset]

i like the fake spoon style one better. the real jdm spoon looks more similar to the mugen lip.

[03chi-town0z]

anyone ever considered this lip/skirt set or anything mentioned here for that matter: http://www.j-rally.net/~marjo/comfort/leg1/index2.html ? or just not worth the money to import maybe:

http://japanparts.com/images/ImageFromDB.php?base=1&no=22448

[Kalamidad]

Well, if you have the resources to get it, someone to import or the money to order it that's a great choicem. The point to this thread was to find inexpensive and easily attainable alternatives since the 8G does get a lot of support.

Thanks for the input.

[beam514]

Where's G-Spot with his CD5 Accord lip? That thing looks awesome!

[galant1983]

99-01 integra lip mugen style

http://i1188.photobucket.com/albums/z401/galant1983/225155_206525652701221_100000313633823_634617_1890 912_n.jpg

[bigvic]

99-01 integra lip mugen style

http://i1188.photobucket.com/albums/z401/galant1983/225155_206525652701221_100000313633823_634617_1890 912_n.jpg

Did u need 2 extend that?

[galant1983]

na i had to cut just alittle off each end and heat the shit out of it so it molded better to the bumper

[unclepaulie]

any of you guys put a lip on old stlye 8g vr4 front bumpers?

[bigvic]

na i had to cut just alittle off each end and heat the shit out of it so it molded better to the bumper

Fukn sweet, ima hav 2 get this then.

[madbmxer963]

i think the Mugen Civic 99-00 front lip one looks best out of all of em

[blackphantom]

Haven't been here for a while now but i recently just put a lip on my 03. Lip is actually for an 98-01 Integra spoon style. Kinda like a mugen and a type r lip together almost. Made of polyurethane and it fits pretty well with only minor modifications to it. A little trimming here and there and it fit pretty well and no heating because it's already flexible so it just bends around your bumper.

[Da_Prodigy]

You should post some pics up phantom

[Armageddon Sunset]

Ive been looking at the 1st gen mazda 6 and its sport model has some nice lips, need to get a hold of one and see how it lines up to the bumper.

[beam514]

Haven't been here for a while now but i recently just put a lip on my 03. Lip is actually for an 98-01 Integra spoon style. Kinda like a mugen and a type r lip together almost. Made of polyurethane and it fits pretty well with only minor modifications to it. A little trimming here and there and it fit pretty well and no heating because it's already flexible so it just bends around your bumper.

damn, I was the only one with the spoon lip before :P

There's a bunch of pictures that I posted on a few pages back.
I still had to use heat to get the lip to keep it's shape around the bumper. Fitment is almost perfect.

[blackphantom]

Here's some pictures. Held on with just screws and no heat gun. Just some trimmings on the inner lip, nothing done to the ends of the lip.


http://i832.photobucket.com/albums/zz250/tcvue/Galant/galant2.jpg

http://i832.photobucket.com/albums/zz250/tcvue/Galant/galant1.jpg

http://i832.photobucket.com/albums/zz250/tcvue/Galant/galant4.jpg

http://i832.photobucket.com/albums/zz250/tcvue/Galant/galant3.jpg

[Exhaust power]

looks like a perfect lip for the 8gb bumper good job. you and beam are the only ones with two different bumpers.

You got the same wheels as i do!

[beam514]

DAMN!! and I thought mine fit well! Your's is perfect!! and you got to keep the end caps.. Damn am i jealous of the 02-03 lol

oh btw it looks awesome :) though I'm a little biased.

[firtiris]

may be something like this

http://img193.imageshack.us/img193/415/1101077830.jpg


http://www.goingfast.info/04_05/ebay_sales/images/cupra_r_lip4_blue1.jpg
http://www.goingfast.info/04_05/ebay_sales/images/cupra_r_lip2_blue1.jpg

[marcopolo23]

Has anyone put the Lancer Gsr X B Style lip on a galant yet?

[bryanjordan]

I was thinking add a lip kit cause of those dam speed bumps we have here

Sent from my SCH-I545 using Tapatalk

[Sanitycard]

I was thinking of just using a universal splitter kit with the universal wrap as a extension to lower it a little. It's black so it won't be noticeable I don't think. Thought bout the lips too and I'm glad I found this thread.

[bylanter]

I was thinking of just using a universal splitter kit with the universal wrap as a extension to lower it a little. It's black so it won't be noticeable I don't think. Thought bout the lips too and I'm glad I found this thread.

When are you planning to install them? Would love to see pics of it.