Konig Next 19x8 on a 8g

[lonestar22]

i hav a discount tire card so im trying to find some good wheels that i can get from there and today i came across these. I just need to know if the stats will fit good on a Galant. i dont know what the backspacing is but on the stats it says 30S but i dont kno wut thats supposed to mean. Wut is the proper backspacing for a 19x8 wheel and will they go on with no problems? heres the link:
http://www.discounttire.com/dtcs/findWheel...&bp=&vid=005036 ('http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=75019&rc=TDMINT&mk=MITSUBISHI&yr=2001&wd=19&dVeh=dVeh&pc=52314&rw=&bp=&vid=005036')

[pinoyesv6]

konig doesn't make that wheel in 19" silver that has an offset that will fit your car. they make a 19x8 with a 40 offset but thats in bronze. and they make a silver one with the 40 offset but its too wide as a 19x9. the 30 offset is just too low for your car.

[Dominicano]

apparently discount tires says that these wheels will fit and they make it in the size, but i don't know about that 30 offset they might stick out a little, its only 12MM so it might not be that much of a difference.

Now, Alan you do know that discount tires get wheels that might not be sold anywhere else but their store

[pinoyesv6]

i went to the konig website and thats how i knew about hte offsets and the colors and sizes.

and apparently konig says it fits also.

http://www.tiredex.com/konig/app_guide_res...alant&B1=Submit ('http://www.tiredex.com/konig/app_guide_results.php?year=2000&make=Mitsubishi&model=Galant&B1=Submit')

but it also says other wheels, some with like 18mm offset fit our cars too.

fitment is one thing but rubbing or the wheel sticking out is another.

[Dominicano]

but it also says other wheels, some with like 18mm offset fit our cars too.

fitment is one thing but rubbing or the wheel sticking out is another.


Very true

[Censee]

companies will tell u anything,,al they wanna do is sell....even if ure wheels stick out like 3-4 inches out your car.....i had a set of chrome wheels aloong time ago,,which were 18x9 or some crazy size like that,,,,,i didnt know too much about offsets and all that,,all i asked was "can i get these in 18s..and find out iof they fit" and the company said yes,,..even the manufacturer said they fit...but they fit horribly

[SilverDragonGTZ]

fitment or not, i'd stay away from konigs....the finish will start flakin off in about 4 months....and they bend like aluminum foil....they make some nice lookin rims...but shit quality

[icEbErg629]

fitment or not, i'd stay away from konigs....the finish will start flakin off in about 4 months....and they bend like aluminum foil....they make some nice lookin rims...but shit quality

true indeed...been there(at the factory in the Philippines where they make Konig, or should I say Rota? https://www.thegalantcenter.org/style_emoticons/default/laugh.gif ) done that (have a set of 18's Racing Hart cp-035 aka Rota) and they don't bend as easily but paint quality's bad. Don't pay more than $400 for a set of "Konig".

[Reelax]

i bent 5 of of the 6 KONIG rims i used to have. buy forged rims from a good company and you will b much happier.

[quicksilver22]

KONIG's are hella soft...


please go to a different company if you like potholes https://www.thegalantcenter.org/style_emoticons/default/sad.gif

[lonestar22]

thanks guys you helped me change my mind. im still looking and i found these NE-O PX-5 they hav a 45mm offset which is close to the 8g's but ive never heard of them. would these be just as bad a choice, ive seen someone on tgc with these rims and i just want something nice the streets arent too bad in texas but i dont want to spend a fortune on forged wheels. what do u guys think, is this the replacement for exel?

[02on19s]

Do what I did...go into the actull store and ask them for the magazines full of rims..........
thats how I found mine 8)
19" KMC Sr Racing SR5 :roll: