Question...

[Illant]

<span style='color:orange'>This is going to sound stupid, but I was trying to clear out my corners today, but I ran into probably the dumbest problems.... I could not figure out how to detach the headlight wires....the corner bulb was easy..but the main bulb, I couldn;t figure out...Can some one help explain..maybe post pics too...Im slow.. </span>:oops:

[Marky]

If I remember correctly the holster that holds the bulb turns, you have to push it in while turning it.

[Kalamidad]

there is no clip or lock...you can pull them out, just pull directly out, not as an angle.

[jacuZZi]

mmm just press the side of the black socket then pull back.

[Kalamidad]

<div class='quotetop'>QUOTE(Marky)</div><div class='quotemain'>If I remember correctly the holster that holds the bulb turns, you have to push it in while turning it.</div>

he's talking about the headlight plug, not the bulb itself.

[mrjaydeeone]

for the headlight bulbs you have to squeeze the sides of the socket and pull it to release
then you remove the rubber boot and then there is a clip that holds the bulb in place you will see which direction to manuver that to release the bulb

[Marky]

I just found this of pinoyesv6 website, see pages 54A-70 under bulb replacement

http://www.mynameistitobhoy.com/Galant%20S...0Manual/54A.pdf ('http://www.mynameistitobhoy.com/Galant%20Service%20Manual/54A.pdf')

[pinoyesv6]

what i usually do is grab the socket by the sides. push in and then pull out. some people like to just pull out but if there's some dirt or corrosion on the terminals, pushing in breaks it up before you pull out.