7G 1g/2g Headswap Partslist

[seth98esT]

http://www.4g64.com/users/raycer97/ ('http://www.4g64.com/users/raycer97/')

Just for you guys who never saw this link. Good information there. You will still have to use JiPs tutorial on the wiring the coilpacks and 2g ECU or you could use the 2g spyder 4g64 ECU.

[JiP]

Travis's page has been under construction for like 4 years now lol. He and I did Moosh's headswap a couple years ago.

He left out what to use as plugs for the holes if your CHEAP like us: Take a soda can cut it open so you can lay it flat. Take the 4g64 head gasket that you pull off and lay it down and trace out the 5 holes that need to be blocked and just cut them out a lil bigger then your trace. Stickem down on the block with a lil rtv and drop the new headgasket down ontop of them. They are non pressurized drain holes, you just want to stop crap from falling into them.

[SuperGALANT]

i have a couple of questions.. if i do the swap w/ a 97 or 96 2g, can i stay obdii complient?
is there a more complete tutorial? (that one is a great parts list)

and how many 4g63 non turbo 2g's are there?!?!

[seth98esT]

Theres a few "tutorials floating around but theres not much else to cover other then wiring. In which JiP kindly has a tutorial(which I have, but need a hosters).

And thats not a 4g63 its a 4g64 DOHC spyder which came with the same sohc motor our 7gs have.

[fastmgalant97]

where can i find the wiring tutorial at ive searched every where!!! please someone point me in the right direction :!:

[seth98esT]

I have JiPs wiring diagram. Give me your email address or find a place where I can upload a zip file.

[DOHCstunr]

it might be better to use somethign like jbweld for those holes(not the quick curing kind)

those holes are non pressurized from the motor, but there is still crankcase pressure to battle.

i would feel more comfortable with somethign more secure.

but to each his own.

also, since we have a 7g radiator, and not a 2g radiator, you woudl use different coolant hoses.

[fastmgalant97]

<div class='quotetop'>QUOTE</div><div class='quotemain'>Just for you guys who never saw this link. Good information there. You will still have to use JiPs tutorial on the wiring the coilpacks and 2g ECU or you could use the 2g spyder 4g64 ECU.</div>


where can i find this tutorial on wiring in the coilpacks nad 2g ecu i need them very badly and every time i ask some1 i get no answer please help me out!

[DOHCstunr]

<div class='quotetop'>QUOTE(fastmgalant97)</div><div class='quotemain'><div class='quotetop'>QUOTE</div><div class='quotemain'>Just for you guys who never saw this link. Good information there. You will still have to use JiPs tutorial on the wiring the coilpacks and 2g ECU or you could use the 2g spyder 4g64 ECU.</div>


where can i find this tutorial on wiring in the coilpacks nad 2g ecu i need them very badly and every time i ask some1 i get no answer please help me out!</div>

check your PM's

[Galant Kid]

https://www.thegalantcenter.org/index...showtopic=50336 (https://www.thegalantcenter.org/index.php?showtopic=50336)

Here's a link for the guys who would rather not do wiring! There will be a tutorial shortly as well.

Enjoy,
-Ian

[da1085]

the link for the head swap is not complete......well the site is not complete.....is there another site? itried googling but couldn't find one

[jake26]

VIRTUAL TOUR OF THE 1G/2G/EAGLE TALON/PLYMOUTH LASER ENGINES CLICK CLICK (http://members.shaw.ca/dsm.1000q/Engineprimer/)

[bronxbombr]

Nice going Jake.

[Blue Ice]

I was wondering would the oil galleys be different if the dohc head was from a GS? I saw a GS in the JY today and was thinking about the far future of my old 4G6. if i did put the head on it would the two be any different. But i still have one project to complete first.

[bmore303]

Nope, you actually have to use a 94 GS Head gasket for the swap :) .

[remarque]

I heard that some people used freeze plugs to cover those holes.

[T-double]

need help on the head swap...pls give better info. What galleries do i plug.... pls help

[Galanttuner10]

i just looked over the list again.. i have all the parts readily available but i need to know if this is the complete parts list or if some things r missing for the 2g headswap

[bmore303]

Well there's the Power Transistor and the knock sensor that aren't on those lists that I remember off the top of my head. I'll have to look over my papers again later.

[Galanttuner10]

Well there's the Power Transistor and the knock sensor that aren't on those lists that I remember off the top of my head. I'll have to look over my papers again later.

ok i knew the knock sensor and the different ignition but not sure if theres more

[Galanttuner10]

you know i was looking at this recently and wondered about people who just go DOHC and no turbo or plans for turbo. Why dont you just get a Stock GS water pipe, thermostat housing and top outlet as the bottom outlet is still the same part as the SOHC and run stock GS radiator hoses, that way, no dual radiator cap setup or extra lines to block off and no weird fitment as they use the same radiator.

parts you would need

Water pipe- MD189194
T-stat housing- MD188386
Water outlet- MD190840
Upper rad hose- MB845903
Lower rad hose- MB845904

also, for pre 97 cam shafts, there is still the slot for the Cam angle sensor so do not try to run the interface plate way as it is a headache, just use a 1G CAS or 97-99 CAS