Distributor Cap and Rotor

[pinoyesv6]

Have any of you V6 guys replaced yours yet?? I see this tutorial ('http://club3g.com/forum/showthread.php?t=457') on club 3g about it but i was wondering if anyone else had some other tips and tricks not mentioned in the tutorial. My car has like 72k on it and i've been meaning to clean/replace it for the longest time. Since parts was cheap, i think i spent like 35 bucks, i decided just to replace the parts.

I ordered my parts from Mitsuparsdirect ('http://www.mitsupartsdirect.com') they are like a few cents cheaper than donherring so i decided to go there. That and they are only like an hour away from my house so im assuming the parts will get to my house quicker than it would if i were to order from donherring. and hey, if they rip me off, i can always drive up there and kick some ass.

[hsinya]

its pretty straight forward if you're mechanically inclined. you just gotta get everything out of the way. if you're using sockets to get to those tiny 8mm bolts you must have a socket extention, otherwise use a screwdriver.

if you're still using stock plug wires you dont really have to mark anything. the distributor cap is labeled and the plug wires are also labeled.

[pinoyesv6]

woo hoo. thats great news. hopefully the parts will be here by this weekend. give me soemthing to do.