How to make grill?

[2kgalant]

I have the Cyber Type 2 bodykit, my question is how do i insert mesh into the front bumper. I am talking about the area where the stock grill used to be. There is a huge opening in the cyber type 2 kit. I have no idea how to fabricate a grill or insert mesh into the bumper. Any ideas?

[mrjaydeeone]

I am having the same problem https://www.thegalantcenter.org/style_emoticons/default/laugh.gif I am gonna leave mine alone until the spring I believe.
click click this jscout247 did the mesh in his, pm him and see how he did it ('https://www.thegalantcenter.org/viewtopic.php?t=40206&highlight=')

[02on19s]

if you have an 02 and up...you'll have to grind/cut the part that sticks out where the old nose of the bumper use to be...then I'm sure you could find some way to put it in...
But I'm not real sure...since I'm using billet 8)
http://img457.imageshack.us/img457/1876/02on19sfront2rz.jpg

[pinoyesv6]

if its just mesh you are gonna install its not that hard.

take off the bumper.

get a piece of mesh bigger than the opening in the bumper

cut the mesh a little bigger than the opening in the bumper.

fold the excess mesh onto the back of the bumper and secure it with fg/bondo/glue/epoxy whatever.