Just don't know?

[jiul]

So I put the heads back on and the car won't start.
Well she turns over a few times then she stops and as she stops fuel spurts out from the #2 injector
What the hecl is going on?

[Donovan]

got any parts left over

[Kalamidad]

got any parts left over

roflmao!

[jiul]

LMAO

[Proto]

:laughing: :laughing: :laughing: :laughing: :laughing: :laughing: :laughing: :laughing: :?:

[NiTrOuSoXiDe]

*falls off chair*

[jiul]

Wel, just to keep everyone's favorite funny thread going, I took the heads the back to the guy that built them 9 and ported and polished'em) and he said that he needed to bleed the lifters. I got them back put them on and the car seems to be running OK.

[seth98esT]

Never heard of bleeding the lifters. I bet the timing was off.

[ChikagoGTZ]

Yes, there is a check ball inside each lifter, you will bleed any oil out of it by pressing the check ball with a thin rod or allen wrench....if you dont do this you could actually blow out a lifter seal (so check it all out before you pay!)