how do you

[unlimited6986]

move the ac controls down or how do you take them out. i took the bezel off and the deck is out took off the 2 screws and now it wont move its got like 2 lil circular things below the screws and it wont move any one know how to do it?

[fatal1]

arent there 4 screws? anyway you just have to play with it and it will move then move push and hold it down take your bezel to line it up make sure the white plastic from the actual coontrols are on the outside of the dash line up your bezel to where it would go even clip it back in while holding the ac controls so they dont move, remove the bezel but do not move the ac controls take a drill bit and drill your holes then put in your screws
sorry i know im being vague but just trying to explain it
there is nothing holdin the actual contols in place though it is still when you first try to move it though

[pinoyesv6]

if your car was once arental car or something you might have some security screws or something instead of 4 screws. if thats the case, just drill em out and proceed as you would if your car had 4 screws.

[unlimited6986]

i just cut them out and moved it down now my only worry is its not flush but will work it out

[cntrylvr79]

The easiest way to make the ac controls flush is to first remove them from the car. Then take a dremel and shave 1/4" off the mounting holes. It'll make them sit perfect on the dash bezel. Not the greatest picture, but I don't have a new camera at the moment.

http://www.geocities.com/cntrylvr01/black_...beauty/fg_3.jpg ('http://www.geocities.com/cntrylvr01/black_beauty/fg_3.jpg')