Titanium03G
02-21-2006, 06:41 PM
Sorry for the noob question but I searched and couldn't find anything. I've been looking around for an exhaust for my 8g (2003) and this is all I can find. Does anyone have any experence with this? Anyone have any other suggestions? Also I have a 2003 and this says 99-02, is there any difference?
<div class='quotetop'>QUOTE</div><div class='quotemain'>Mistsubishi Galant 99-02 2.4 *
Model Number : MR-CBS-MG9924 * *
* *
One of Megan Racing's strongest products, the Cat-Back System is made by SUS One of Megan Racing's strongest products, the Cat-Back System is made of SUS-304 Stainless Steel with a fully polished surface, CNC machined flanges and mandrel bends. Its aggressive styling, and deep, strong tone are just part of the MR Cat-Back characteristics. It also serves to improve horsepower, torque and overall performance with its straight-through design. The exhaust systems have 2.5” piping and 3” piping for certain forced induction models. Finished with a tip that is designed to increase the scavenging effect and achieve maximum performance, while adding a perfect match on exterior styling as well. As a direct bolt on, each Cat-Back comes with a 12-Month warranty.
Series:
- Drift-Spec
Our new cat back system is the drift-spec style. Designed to give it a more agressive look the exhaust is angled up and outward. Depending on each car and each bumper design, the exhaust will vary upon the direction and angle that it sits.
Spec:
- For Mit. Galant 99-02 2.4 SOHC
- 4" tip with 5.5" width muffler
- Removable double-layer silencer, 2.5" piping with 2.25" inlet.
- 3 pieces with built-in resonator
- 100% stainless steel with polish finish
- Producing strong, deep and noticable sound
- Direct bolt-on application
- Gain 10-15 more horse power, faster response
- Comes with one gaskets, bolts & nuts
- Warranty included
- Price: 379.95
Remark: Pictures are showing samples only. *
*
</div>
<div class='quotetop'>QUOTE</div><div class='quotemain'>Mistsubishi Galant 99-02 2.4 *
Model Number : MR-CBS-MG9924 * *
* *
One of Megan Racing's strongest products, the Cat-Back System is made by SUS One of Megan Racing's strongest products, the Cat-Back System is made of SUS-304 Stainless Steel with a fully polished surface, CNC machined flanges and mandrel bends. Its aggressive styling, and deep, strong tone are just part of the MR Cat-Back characteristics. It also serves to improve horsepower, torque and overall performance with its straight-through design. The exhaust systems have 2.5” piping and 3” piping for certain forced induction models. Finished with a tip that is designed to increase the scavenging effect and achieve maximum performance, while adding a perfect match on exterior styling as well. As a direct bolt on, each Cat-Back comes with a 12-Month warranty.
Series:
- Drift-Spec
Our new cat back system is the drift-spec style. Designed to give it a more agressive look the exhaust is angled up and outward. Depending on each car and each bumper design, the exhaust will vary upon the direction and angle that it sits.
Spec:
- For Mit. Galant 99-02 2.4 SOHC
- 4" tip with 5.5" width muffler
- Removable double-layer silencer, 2.5" piping with 2.25" inlet.
- 3 pieces with built-in resonator
- 100% stainless steel with polish finish
- Producing strong, deep and noticable sound
- Direct bolt-on application
- Gain 10-15 more horse power, faster response
- Comes with one gaskets, bolts & nuts
- Warranty included
- Price: 379.95
Remark: Pictures are showing samples only. *
*
</div>