Clearing Corners and Fog lights Rewire

[spetsnaz]

I decided to clear my corners today, I spent quite some time in the heat and finally cleared my right head light. The left one is taking forever though, it slipped from the spot where is suppose to sit and just wont crack. I just have no way of reaching it with anything to crack it, I am using the little bar tool just like somebody recommended.
http://img82.imageshack.us/img82/2564/clearingcornersyk3.th.jpg ('http://img82.imageshack.us/my.php?image=clearingcornersyk3.jpg')

As fare as the fog lights, I read the post about the rewiring process, and I missed what to do with the red wires? Do we have to cut them and connect to the switch? Or is there a way to just use the stock button without getting the switch?

[pinoyesv6]

where's the reflector on the left side headlight?

[ipaintu]

take oven turn it on 250 till redlight goes off which means temp is 250.

take a cookie sheet and place headlight on it. Set timer on oven for 10 mins. wait then once 10 is up. take out of oven.. Work kinda fast and remove the little snaps that hold the headlight as one. Once this is done simply pull light apart. once this is done then do the same thing to oven and place headlight back in. Once its 10 min up take out and squeeze the hell outta headlight till it snaps back..

I have done this alot of times on tails and heads and fogs. If you have any issues we are hur fur yu...

[Armageddon Sunset]

is this fog light re-wire for the fog lights to be able to turn on with only the side lights on (as opposed to the factory settings of only to be on when the low beams ar on)......thats what I want to do.

[Kalamidad]

<div class='quotetop'>QUOTE(Armageddon Sunset)</div><div class='quotemain'>is this fog light re-wire for the fog lights to be able to turn on with only the side lights on (as opposed to the factory settings of only to be on when the low beams ar on)......thats what I want to do.</div>

yes. Look in the tutorial section for the walk-though.

[Armageddon Sunset]

thanks man, I'll go take a look at it and see what I have to do.

[lKoRTy]

<div class='quotetop'>QUOTE(Kalamidad)</div><div class='quotemain'><div class='quotetop'>QUOTE(Armageddon Sunset)</div><div class='quotemain'>is this fog light re-wire for the fog lights to be able to turn on with only the side lights on (as opposed to the factory settings of only to be on when the low beams ar on)......thats what I want to do.</div>

yes. Look in the tutorial section for the walk-though.</div>

where?? i didnt find it? :?:

[Kalamidad]

<div class='quotetop'>QUOTE(lKoRTy)</div><div class='quotemain'><div class='quotetop'>QUOTE(Kalamidad)</div><div class='quotemain'><div class='quotetop'>QUOTE(Armageddon Sunset)</div><div class='quotemain'>is this fog light re-wire for the fog lights to be able to turn on with only the side lights on (as opposed to the factory settings of only to be on when the low beams ar on)......thats what I want to do.</div>

yes. Look in the tutorial section for the walk-though.</div>

where?? i didnt find it? :?:</div>

Sorry about that, it wasn't on the tutorial section, which it should. It was under customising your 8G.

Here's the link.

https://www.thegalantcenter.org/viewt...p=505391#505391 ('https://www.thegalantcenter.org/viewtopic.php?p=505391#505391')

[Armageddon Sunset]

I found a different tutorial......angel eyes for the fog lights.
https://www.thegalantcenter.org/viewt...pic.php?t=35344 ('https://www.thegalantcenter.org/viewtopic.php?t=35344')

but that other one that Kalamidad posted is what im actually interest in.....did they ever figure out how to use the stock fog light switch?

[Kalamidad]

<div class='quotetop'>QUOTE(Armageddon Sunset)</div><div class='quotemain'>I found a different tutorial......angel eyes for the fog lights. Â*
https://www.thegalantcenter.org/viewt...pic.php?t=35344 ('https://www.thegalantcenter.org/viewtopic.php?t=35344') Â*

but that other one that Kalamidad posted is what im actually interest in.....did they ever figure out how to use the stock fog light switch?</div>

no.

[Armageddon Sunset]

well that sucks, at least they found a way to wire it so that when the car is off the fogs go off and dont drain the battery if accidentally left on.

spetnaz: how easy is this wiring job exactly?

[Kalamidad]

the one i posted is not difficult at all, the one up top is a bit for demanding. But i wouldn't suggest doing either one if you're not comfortable with circuits. Have a friend who knows help you.

[lKoRTy]

^^^ why u dont answer ur aim??

[Armageddon Sunset]

yeah I dont trust myself to any wiring jobs, unless I have some help from somebody that knows what to do, as for friends they dont know shit when it comes to cars.

[Kalamidad]

<div class='quotetop'>QUOTE(lKoRTy)</div><div class='quotemain'>^^^ why u dont answer ur aim??</div>

The request came up as i was typing and i type pretty fast, so it got denied before i could read it... https://www.thegalantcenter.org/style_emoticons/default/laugh.gif try me again...

[lKoRTy]

still no answer!!!!

[murlopaz]

this is everything i used.
notice the large piece... i had to improvise...
http://img245.imageshack.us/img245/8508/clearcornerscm5.th.jpg ('http://img245.imageshack.us/my.php?image=clearcornerscm5.jpg')

[Kalamidad]

haha, whatever works man.

[spetsnaz]

Finally did it, thanks to the new long pliers that have heir tips bent to the side.. i did it.

http://img240.imageshack.us/img240/1911/toolsuc8.th.jpg ('http://img240.imageshack.us/my.php?image=toolsuc8.jpg')

This is how it looks like:

http://img240.imageshack.us/img240/3206/clearcornersak5.th.jpg ('http://img240.imageshack.us/my.php?image=clearcornersak5.jpg')

So what do i do with the red wires??
Also which switch do i need, there is a switch with three output acc, ground and something else, and there are switches with two, which one do i need?

[n1ghtryd3r]

:twisted:
I did mines yesterday it took like an hour for both, i took of the signal and headlight bulb out, didn't even need to take of the headlamp. Then i took a hanger and bent it on the tip like a hook or however its easier for you to latch on the yellow plastic and pull till it brakes into pieces, then with patience the small part out towards the signal light hole and big parts towards the headlights (when pushing big pieces that are impposible to brake to smaller pieces push them towards the head light. Becareful, take it easy pushing these pieces as far as you can with your fingers and with the hanger push it close to the headlight hole). Trust me it works my wife was loosing her mind because she was waiting for me inside to spend some quality time but i still love her though. now i have $145.00 in my pocket that i can take my wife to get new clothes laterz..... :mg:

http://memimage.cardomain.net/member_images/11/web/2387000-2387999/2387590_17.jpg[/img]']http://www.cardomain.com/ride/2387590/1[IM...90_17.jpg[/IMG] ('http://www.cardomain.com/ride/2387590/1[img)

[Kalamidad]

nice work guys...

how's that rewire coming along?

[spetsnaz]

So what do i do with the red wires??
Also which switch do i need, there is a switch with three output acc, ground and something else, and there are switches with two, which one do i need?

Hey Kala, what kind of bulbs do you have for your front turning signals?

[Kalamidad]

So what do i do with the red wires??
Also which switch do i need, there is a switch with three output acc, ground and something else, and there are switches with two, which one do i need?

Hey Kala, what kind of bulbs do you have for your front turning signals?

you do nothing with the red wire...you're working with the white one.

you can use the one with three prongs...that one just has a light for when the circuit is functioning. AN INDICATOR.

you can also use either. I'm using a three prong switch.


I'm using some regular "hyperwhite" 1157s

[spetsnaz]

Cool thanks alot man, so all i do is just cut the white wire and connect the two ends to the prongs, but which ones, i will be using a three prong switch, i like the idea of the indicator light. Do i need a power source for the indicator or will it work just from the white wires?

[Bigshot]

Onlyphases has a board to help you use the button. i got it off the chain...

I found a different tutorial......angel eyes for the fog lights.
https://www.thegalantcenter.org/viewt...pic.php?t=35344 ('https://www.thegalantcenter.org/viewtopic.php?t=35344')

but that other one that Kalamidad posted is what im actually interest in.....did they ever figure out how to use the stock fog light switch?

[legendx]

:lol: