PDA

View Full Version : transmission fluid



mitsueclipse2019
07-24-2006, 11:41 AM
whats the best transmission fluid to use?

seth98esT
07-24-2006, 11:46 AM
Mitsubishi ATF3 for Autos
BG Synchro shift or GM Synchro mesh for 5spd.

peanotation
07-24-2006, 10:05 PM
i have BG synchro shift 2 in my 5spd and it's bliss

mitsueclipse2019
07-25-2006, 04:12 AM
ok cool thanks for the info now i just gotta get some :?

mitsueclipse2019
07-26-2006, 10:32 AM
i found this on another forum can any confirm this info?


Couldn't get any Mitsubishi transmission fluid so refilled with Dexron III (which my local Mitsubishi dealer told me they use)

pinoyesv6
07-26-2006, 11:00 AM
to me replacing mitsu tranny oil with dexron iii is like replacing spring water with river water. of course you could still use it but the long term effects are different.

sabzi5858
07-26-2006, 11:09 AM
Mitsubishi Dexron 3 for Autos
BG Synchro shift or GM Synchro mesh for 5spd.

or you could get penzoil syncromesh; it's the same stuff as gm's, but cheaper and more available.

medvr
08-23-2006, 08:58 AM
is the synchromesh different from synthetic tranny fluid?

furiousgtz
08-23-2006, 09:27 AM
i need to do Tranny fuild change...
same goes for 8g v6? right

mitsueclipse2019
03-03-2007, 01:04 PM
ok i was at auto zone not to long ago and was looking through their transmission fluid and out of all the ones i looked at only 1 had mitsubishi on the back and it was for automatics, i can remember the name but if it has mitsubishi on the back does it mean its safe to use with our cars?

Sleepervr-4
03-03-2007, 01:35 PM
get diamondstar atf +3 from the dealer. It isn't cheap but it is what the service manual recommends.

seth98esT
03-03-2007, 02:20 PM
Any Mitsu tech will tell you to ONLY use the Mitsu ATF. Id spend a few extra and get it straight from the dealer.

fuel
03-03-2007, 03:40 PM
Yeah don't use Dextron III it was used in the older Mitsi autos (the KM series, ie KM175 4 speed in the 85-89 Galant/Sigma). If you must use aftermarket use Castrol TQ95 or Valvoline 95LE. But otherwise I would recommend using the specified fluid from the Mitsu dealer.

Personally I would just stick to a manual :P

peanotation
03-05-2007, 01:05 PM
is this for an automatic or 5spd? don't use the penzoil syncromesh for the 5spd....there are occasionals postings on tuners of people changing their syncromesh fluid and it came out like water with crap in it.....run syncroshift2 from BG

for automatics only use mitsu fluid