Known to fit aftermarket speakers - please list

[malicious]

If you have aftermarket 6.5" component speakers, 6x9" speakers, or aftermarket dash/center channel PLEASE list the EXACT model you've installed.


I've heard that Memphis Audio Power Reference Series 6x9s fit in the back deck with no trunk torsion bar issues.

Also, I believe some 3.5" speakers would fit in the 2.5" center speaker location with some modification.

I am unaware of any known 6.5" component speakers where the tweeter is a direct replacement.

Thanks for your help fellas...

Mal

[RedGalant2k1]

In the front you need 6.5" oversized, or better yet a 6.75" speaker.

You could fit a 3.5" speaker in the dash however the extra work to make a plate, and cover is unnecessary.

3" depth and below 6x9s fit within the torsion bars.

[malicious]

In the front you need 6.5" oversized, or better yet a 6.75" speaker.

You could fit a 3.5" speaker in the dash however the extra work to make a plate, and cover is unnecessary.

3" depth and below 6x9s fit within the torsion bars.



is that 3" top mount?

[RedGalant2k1]

is that 3" top mount?


Yes, at least the 8G Galant is a topmount.

[fatal1]

just dont get anything with a large deep magnet you could always make custom brackets its not hard

[malicious]

i'd like to put infinity reference series 6x9 in the back deck

www.acaraudio.com says 3 1/16"......... sigh

really i'm not stuck on the infinitys ... just want silk tweeters instead of metal and they are reasonably priced etc...

[fatal1]

i have the reference in my rear you will need a 1/2 in spacer they prob sell them wherever your looking to get them to keep them from hitting the trunk bars if you go with them in the doors i also have the 6 1/2 you will need o make brakets but they fit fine with clearance

[malicious]

sweet ..

yea i'm thinking infinity reference all around....

are you using the HU power or an amp?

did you make the bracket for the 6.5s or?