Gauges

[thareelcauz06]

I was wondering if anyone knows a place that can make a gauge pod for 3 gauges that I could put it in the cubby hole in our dashboard

[fatal1]

they sell single din guage pods (that is the size of the cubby) they can be foundpretty easily try ebay

[Calipso]

they sell single din guage pods (that is the size of the cubby) they can be foundpretty easily try ebay


Yea, there are a few places online. You can also build one plastic/wood and fiberglass it and hold it in with some kind of brackets.

Like if you remove trim around the headunit, you'll notice the cubby is only behind held in by 4 screws. You can remove it and build a little wall in the front of it and cover it with fiberglass and have the gauges installed that way. 8-)

[pinoyesv6]

Yea, there are a few places online. You can also build one plastic/wood and fiberglass it and hold it in with some kind of brackets.

Like if you remove trim around the headunit, you'll notice the cubby is only behind held in by 4 screws. You can remove it and build a little wall in the front of it and cover it with fiberglass and have the gauges installed that way. 8-)

it doesn't even have to be fiberglass. you can achieve the same effect with a piece of wood or even a sheet of plastic.

[8gV65spd]

Go to mcmaster-carr.com, they are a rawl materials company. Type in ABS plastic in the search block, there will be listings for black 12"x12", 1/8th sheets.

[Reelax]

the evo 8/9 DIN 3 gauge cluster should fit as well if you can get one of those from somebody that is not using theirs (since alot of those guys swap out to full size gauges).