MAIN BOLT TORQUE SPECS HELP ASAP

[microgalant]

I'm building my 2.4l 7 BOLT galant 1996,I'm using the stock main bolts (the one's who hold the main caps to the crank)I need to know the torque specs for them ASAP
ANYONE CAN HELP ME?THANKS

[DOHCstunr]

I'm building my 2.4l 7 BOLT galant 1996,I'm using the stock main bolts (the one's who hold the main caps to the crank)I need to know the torque specs for them ASAP
ANYONE CAN HELP ME?THANKS

i don't know the specs off the top of my head, i will say however do not reuse your old ones.

[peanotation]

<div class='quotetop'>QUOTE("http://www.extremeevolutions.com/4G64_buildup.htm")</div><div class='quotemain'>if you plan on using ARP main studs you will want to have your block line honed with the ARP studs and dowel kit installed and the studs torque to 55 ft-lbs.</div>

that's for ARPs....i'll check my service manual and see if it has specs for the OEM studs...but i doubt it

[seth98esT]

And Im sure just like the head studs theres a dry and a wet torque. Dry will always be higher then wet. By wet I mean using a molyex lube, I also assume the ARPs 55ftlbs is with the lube.