PDA

View Full Version : No juice to the gauge cluster



xmojox
11-23-2002, 06:44 PM
I am not receiving any power from the wires that attach to the ballast wires of the reverse el gauges. I checked the ballast and the gauges and they are fine. I noticed that the small bulbs on the back of the cluster are not lighting as well. Is there a fuse for this wiring, and if so what is the fuse listed under, 'cause I checked them all? If it is not a fuse related problem, does anyone else have any solutions? Thanks.

pinoyesv6
11-24-2002, 03:29 PM
make sure the two connection on the back of the cluster are plugged in. but before that, make sure that the dimemr switch is plugged in too

karlkaniguy
11-24-2002, 08:38 PM
check your passenger side tail light and your driver side fog light as well.
right now i am having the same prob as you except those other things are out to. I did have the same thing happen before and it was just a fuse under the hood if i remember correctly it was a 10amp labled with a little guage and needle. just hope you are not having the same prob as me i have checked every fuse and connection in my car.