Norcal Performance
11-27-2002, 09:32 PM
Hey all,
We're Norcal Performance. www.norcal-performance.com We have been checking out the forums lately and from what we can see you're lacking good options for serious power. Well we intend to change that. First of let me tell you a little about us.
I'm Tim the Sales and Marketing Director, I drive a 2001 Dodge Stratus Coupe 2.4L which is currently the only Turbocharged Stratus out there. We have also are in the final stages of an automatic to 5-speed swap on my car.
Cliff, the owner of Norcal Performance, drives a 2000 Mitsubishi Eclipse 3.0L, which has just finished dropping a new engine into it, after a little run in with a blown engine. (125 shot of Nitrous on stock injectors, his ego got a little big trying to beat his old bosses F360 Spider) Big plans are in store for this car.
Now just to give you guys an idea of what we can offer. We are registered dealers/installers for RIPP Mods, AMSS, as well as our own products.
We also carry everything you need for your Galants. We have Springs, coilovers, intakes, exhaust, headers, gauges. You name it we can get it. And if we cant we'll tell you who can.
We are also in the process of fine tuning a turbo kit for the 2.4L Galant/Eclipse/Stratus. This kit will include the following:
T3/04 Turbonetics Turbo
Spearco Custom Front Mount Intercooler
Custom Manifold
440cc RC Engineering Fuel Injectors
Internal Wastegate
HKS Super Sequential BOV
Apexi S-AFC
All neccessary piping to fit*
We will also include baseline tuning calculations for the kit to allow you to get up and running safely, and to the dyno for more serious tuning. The kit will be preset to 6psi
This same kit has been running on my car since February with no problems whatsoever. This is due to the high quality of fabrication and the fact that we tuned, tuned and tuned some more. We feel that this is the most important key to a safe/reliable kit.
Base gains from this kit on 4 psi automatic transmission are 55whp. We dynoed at 165whp and 176.4 ft-lbs of torque. Now I realize this doesnt seem like a huge gain, but it is only a starting point. On the 5-speed, gains will be closer to 190whp and 215ft-lb of torque at 4 psi. So expect the gains at 6psi to be about 200 hp to the wheels.
The target price is $3600.
*We are currently looking for a test car to install this kit on. Due to the fact that we havent installed this kit on a Galant, we want to make sure that all the piping is correct, to allow for perfect fitment. We expect only minor modifications to the intercooler piping, if any at all.
So if any one in the greater California Bay Area would like to donate there car for a few days, you will get the kit at a greatly reduced price.
As you know RIPP is also in the process of producing a 4cyl SDS system. We are authorized dealers of RIPP's and can order and install both the I4 and the V6 SDS kits.
We also have the ability to have body kits and custom CF hoods made. These are of the highest quality, and look great. We are in the process of completing a long time project over on www.2gstratus.org The members there designed the body kit and we took the plans and developed the kit. If the members here would like to do the same, we will be more than happy to produce the body kit for you. This allows you the members to have a say in what you want the kit to look like.
Both Cliff and I will visit the boards as much as possible, so feel free to drop us a line at [email protected] or give us a call at 408-226-2023.
Thanks again, and we look forward to pushing the aftermarket envelope.
Tim
Norcal Performance
We're Norcal Performance. www.norcal-performance.com We have been checking out the forums lately and from what we can see you're lacking good options for serious power. Well we intend to change that. First of let me tell you a little about us.
I'm Tim the Sales and Marketing Director, I drive a 2001 Dodge Stratus Coupe 2.4L which is currently the only Turbocharged Stratus out there. We have also are in the final stages of an automatic to 5-speed swap on my car.
Cliff, the owner of Norcal Performance, drives a 2000 Mitsubishi Eclipse 3.0L, which has just finished dropping a new engine into it, after a little run in with a blown engine. (125 shot of Nitrous on stock injectors, his ego got a little big trying to beat his old bosses F360 Spider) Big plans are in store for this car.
Now just to give you guys an idea of what we can offer. We are registered dealers/installers for RIPP Mods, AMSS, as well as our own products.
We also carry everything you need for your Galants. We have Springs, coilovers, intakes, exhaust, headers, gauges. You name it we can get it. And if we cant we'll tell you who can.
We are also in the process of fine tuning a turbo kit for the 2.4L Galant/Eclipse/Stratus. This kit will include the following:
T3/04 Turbonetics Turbo
Spearco Custom Front Mount Intercooler
Custom Manifold
440cc RC Engineering Fuel Injectors
Internal Wastegate
HKS Super Sequential BOV
Apexi S-AFC
All neccessary piping to fit*
We will also include baseline tuning calculations for the kit to allow you to get up and running safely, and to the dyno for more serious tuning. The kit will be preset to 6psi
This same kit has been running on my car since February with no problems whatsoever. This is due to the high quality of fabrication and the fact that we tuned, tuned and tuned some more. We feel that this is the most important key to a safe/reliable kit.
Base gains from this kit on 4 psi automatic transmission are 55whp. We dynoed at 165whp and 176.4 ft-lbs of torque. Now I realize this doesnt seem like a huge gain, but it is only a starting point. On the 5-speed, gains will be closer to 190whp and 215ft-lb of torque at 4 psi. So expect the gains at 6psi to be about 200 hp to the wheels.
The target price is $3600.
*We are currently looking for a test car to install this kit on. Due to the fact that we havent installed this kit on a Galant, we want to make sure that all the piping is correct, to allow for perfect fitment. We expect only minor modifications to the intercooler piping, if any at all.
So if any one in the greater California Bay Area would like to donate there car for a few days, you will get the kit at a greatly reduced price.
As you know RIPP is also in the process of producing a 4cyl SDS system. We are authorized dealers of RIPP's and can order and install both the I4 and the V6 SDS kits.
We also have the ability to have body kits and custom CF hoods made. These are of the highest quality, and look great. We are in the process of completing a long time project over on www.2gstratus.org The members there designed the body kit and we took the plans and developed the kit. If the members here would like to do the same, we will be more than happy to produce the body kit for you. This allows you the members to have a say in what you want the kit to look like.
Both Cliff and I will visit the boards as much as possible, so feel free to drop us a line at [email protected] or give us a call at 408-226-2023.
Thanks again, and we look forward to pushing the aftermarket envelope.
Tim
Norcal Performance