Dismantling wood grain pieces on dash

[galantracer97]

I searched for this and could not find anything on it. i am looking to take the wood grain off to paint it and i don't want to break the plastic pieces. Does anyone know where i can find a tutorial for this.

[n3oAcid24]

I searched for this and could not find anything on it. i am looking to take the wood grain off to paint it and i don't want to break the plastic pieces. Does anyone know where i can find a tutorial for this.

for the fake wood on the doors, you have to take off the door panel. and for the radio and shifter, you just pop it out with a flat head screw driver.

[galantracer97]

ok thanks

[n3oAcid24]

ok thanks

no problem... when you take off the door panel, make sure your window is down.

[Blue Ice]

if it's a 7g, you need to pop the shifter trim out,m then there are 2 screws that come out, also remove the ash tray. place the shifter in drive or oven low to get the dash trim out easily. other wise you risk creasing the side of the radio bezel. you'll need to un hook all the button, defrost, air circulation, ash tray light, cig lighter, light, power, and ground

As far as vents they just pop out, the gauge cluster has two screws in the top, buttons next to the steering wheel pop out

[galantracer97]

well i got "woodgrain" off but the piece that goes around the shifter lost a little off the corner i should be able to glue that back on but my concern is 3/4 clips ae now broke off.

[n3oAcid24]

well i got "woodgrain" off but the piece that goes around the shifter lost a little off the corner i should be able to glue that back on but my concern is 3/4 clips ae now broke off.

you drive an 8G right?

[kolio]

well i got "woodgrain" off but the piece that goes around the shifter lost a little off the corner i should be able to glue that back on but my concern is 3/4 clips ae now broke off.

you drive an 8G right?

we are in the 7G section, and his name is "galantracer97"

[n3oAcid24]

well i got "woodgrain" off but the piece that goes around the shifter lost a little off the corner i should be able to glue that back on but my concern is 3/4 clips ae now broke off.

you drive an 8G right?

we are in the 7G section, and his name is "galantracer97"

i didnt notice that. i was going to tell him i had a spare one i could give him...

[kolio]

well i got "woodgrain" off but the piece that goes around the shifter lost a little off the corner i should be able to glue that back on but my concern is 3/4 clips ae now broke off.

you drive an 8G right?

we are in the 7G section, and his name is "galantracer97"

i didnt notice that. i was going to tell him i had a spare one i could give him...

the trim pieces are so cheap i've broken 3 of them

[galantracer97]

Just to let you know i am driving a 98 now i sold my 97

[kolio]

still 7g

[galantracer97]

i know this i was jsut saying that the name i have is from my old car that is all

[mattalicslvr8g02]

Try to repare it and if it dosent work start hitting up the junkyards