40" rims

[mrjaydeeone]

who is going to be the 1st to rock a set of these on their G :shock:
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs1.jpg
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs2.jpg
http://i118.photobucket.com/albums/o91/prohopper1/40susamotorsports.jpg
http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg

[pvu_rida]

Ya'll do know thats here in Houston Right

[galant305]

:smt011

[mattalicslvr8g02]

OK, who is going to be the first with 60" rims?.. man that is over doing it

[9G]

hmm..

[furiousgtz]

gay...............


they should stop at 24

[SkylineG1]

How dumb is this gonna get? You can't even run over a pebble on the street & not bend or crack those. :evil:

[mattalicslvr8g02]

they hold 3 psi of air :wink: :lol:

[Bezzle]

*speechless*

[Proud Galant Driver]

gay...............


they should stop at 24

X2

[mapid145]

so.. when u do get a flat or something rite.. then wat do u do..

[Sleepervr-4]

I want to know how the fuck he gets in that thing :shock:

[Kid]

USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D

Kid

http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg

[02redgalant]

:smt017 dum

[SkylineG1]

I wonder how much they paid for those rubberbands around the wheel?

[GoldGalant [Reborn]]

USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D

Kid

http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg

Still gay

[G-spot]

First time I saw that I knew those were "Blade" rimz and knew it was in Houston Somewhere.


And yes, I have seen "Blades" 21s on a 9G around town :smt044

On the side note, that purple 3G behind it is sick!!! :shock:

[mitsufan]

There aint no way in HELL you could pay me to put those on my G!!! That is the dumbest gayes crap I have ever seen in my entire life. I wonder when his ball joints or spindles are gonna snap and then hes gonna roll that damn thing. LOL you cant drive with the wind blowing at all.The tires do look like over-streached rubberbands about to snap. :roll: :smt078

[Kid]

]Still gayI'll give you that, however USA Motorsports is one to not be into things like that...
They're in the whole lowrider scene and in this case, the "I Can Do Better Than You Can" genre...
Hence Big ass rims are popular for some reason, and nobody's rocked 40", until now...
And when someone tries to out do them, USA will trump you again...
:D

Kid

[seth98esT]

they hold 3 psi of air :wink: :lol:
I highly doubt the tires hold air. Probably just a band of rubber. Theres no way that thing could be driven at all on normal roads.

His wheels are bigger then my tv haha.

[Alexey]

WTF... as you can see, bigger is not always better :smt075

[4g63lover]

Gay

[RedGalant2k1]

Whats the big deal....I'd rock a set :smt109

[pinoyesv6]

even the amish are doing it

http://www.thespincycle.com/files/CarraigeRideLarge.jpg

[frag_daddy_2007]

of course, the amish are old skool pimps!

[Proud Galant Driver]

even the amish are doing it

http://www.thespincycle.com/files/CarraigeRideLarge.jpg

I think the Amish are doing it better too.

[Diamndsr4eva]

]Still gayI'll give you that, however USA Motorsports is one to not be into things like that...
They're in the whole lowrider scene and in this case, the "I Can Do Better Than You Can" genre...
Hence Big ass rims are popular for some reason, and nobody's rocked 40", until now...
And when someone tries to out do them, USA will trump you again...
:D

Kid

X2 ^^Gold galant...still fucking gay
:smt018 :smt078

[6G72gearhead]

even the amish are doing it

http://www.thespincycle.com/files/CarraigeRideLarge.jpg

I think the Amish are doing it better too.
I'll bet it'd win the drag race.

[evil-G-nius]

Again I say DONK needs to disappear! The worst thing to ever happen to modding cars! Those rims cost more than the car! I mean seriously...it is fuck stupid looking! Flame that bitch

[01galant01]

dat thing looks lik a monster truck....really ugly, maybe he should of just used the money to buy a new car

[6G72gearhead]

I'd like to hit that thing with an HMMWV.

[fatal1]

just change the rubberband when you get a flat, what is the point of that? looksd retarded

[polishmafia]

the "I Can Do Better Than You Can" genre...Kid

they did a whole lot fucking worse. that is the stupidest mother fucking atrocity i have ever laid my eyes on.

[Jeffylou87]

How does he jack it up to get those rims off? Axles are too low for a floor or shop lift... Hmmm :smt017

[Kenneth G]

]
USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D

Kid

http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg

Still gay

x30

[shortdogg2k05]

Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!

[Kenneth G]

Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!

lol, well at least they dont spin too, or float, or any of that other crap... that would be cause for an immediate air strike on that vehicle.

[mattalicslvr8g02]

Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!

lol, well at least they dont spin too, or float, or any of that other crap... that would be cause for an immediate air strike on that vehicle.

it causes 1000lbs of thrust :wink: :lol:

[IceDouTGaLanT]

:roll: bigger always doesnt mean better

[surycdrol]

who is going to be the 1st to rock a set of these on their G :shock:
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs1.jpg
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs2.jpg
http://i118.photobucket.com/albums/o91/prohopper1/40susamotorsports.jpg
http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg

Have fun stopping with all that rim, and those little ass brakes

[evil-G-nius]

I was just thinking the same thing at this very second! I cant even see the damn brakes!

[frag_daddy_2007]

it has brakes!? :shock:
i dont even see brake lines, you know that that cant be driven around much

[AVERAGE]

The term "fucking ridiculous" comes to mind :lol: Im guessing that's just a show piece.

[mattalicslvr8g02]

http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg

Have fun stopping with all that rim, and those little ass brakes

looks liek he has drums :roll: :?

[DOHCstunr]

talk about a fucked up gear ratio.

that engine is going to be lugging in evey gear.

not that i'd drive that car above 0 mph

[skyhigh90210]

What size disc do you think it will take to stop that thing?

[mattalicslvr8g02]

15" +

[RedGalant2k1]

talk about a fucked up gear ratio.

that engine is going to be lugging in evey gear.

not that i'd drive that car above 0 mph

Why?

Those old chevy 350s (which is likely what it has) have plenty of low end power. The only issue is the gearing of the axles, but I suspect those are dana44s which can more the adequately handle something with that much rolling mass. It could also have a old strong chevy 10-bolt rear axle which also can handle turning those things easily.

Not that I'd care to ever drive it, just stating that its easy with the right engine and drivetrain combo, even being unmodified.

[DOHCstunr]

i just like that therre is no suspension whatsoever.
the fabrication they did to allow for such an obomination
involved nothing more than welding a bunch of steel so they woudl ahve clearance.

no shocks, no springs.

so gay

[mattalicslvr8g02]

i just like that therre is no suspension whatsoever.
the fabrication they did to allow for such an obomination
involved nothing more than welding a bunch of steel so they woudl ahve clearance.

no shocks, no springs.

so gay

thats the wrong and cheap way of doing it, the right way(which ive helped on) is to get an actual truck suspension & spindals then you extend and weld innew metal in the control arms and trailing arms.. ... ill try to find a pic od the car i helped work on


EDIT: I found a pic, the car right next to it is a s-class benz just to give you an example of how high it is.. it is lifted 6inches and it has 26's on it

http://img396.imageshack.us/img396/3927/lda0dd89476ed6c03d7d526pg1.jpg (http://imageshack.us)

[bmxmike]

Thats ridiculous its a waste. Cause he probably ended up payin around 8k to do all that or so, considering if those rims are any good im sure it was at least bout 4k or more for them. And to get all the fab work and new axles cause they usually by hummer axles and hook them up, (only now cause my friend tried to do it once). Waste of money.

[RedGalant2k1]

Thats ridiculous its a waste. Cause he probably ended up payin around 8k to do all that or so, considering if those rims are any good im sure it was at least bout 4k or more for them. And to get all the fab work and new axles cause they usually by hummer axles and hook them up, (only now cause my friend tried to do it once). Waste of money.

I'll give you money if you can find a set of new 26" Gianelle 5-holes with 305/30-26 Pirellis for less than $4000. I've never seen anyone get 26s for less than $6000.

[jhunter]

Hey, hey, maybe he just wanted easy access to the oil pan... :roll: :P

[Fishboy55]

Without a doubt the most ridiculous waste of time and money to be posted in quite some time. Looks like shit, and undoubtedly drives like shit (if it drives at all). Easy to change the oil though :lol: What a dumbass....

[Kid]

http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_258_full.jpg
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_259_full.jpg
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_260_full.jpg


On the side note, that purple 3G behind it is sick!!! :shock:

http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_256_full.jpg

Kid

[G-spot]

^ Was that a 3G or a figment of my imagination :shock:

[Xska55]

WOW! Im speechless, I personaly dont care to much for it but I do apprciate when people are always willing to put in the hard work and thought process to out do the next guy.