View Full Version : 40" rims
mrjaydeeone
03-27-2007, 07:39 PM
who is going to be the 1st to rock a set of these on their G :shock:
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs1.jpg
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs2.jpg
http://i118.photobucket.com/albums/o91/prohopper1/40susamotorsports.jpg
http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg
pvu_rida
03-27-2007, 07:42 PM
Ya'll do know thats here in Houston Right
galant305
03-27-2007, 07:42 PM
:smt011
mattalicslvr8g02
03-27-2007, 07:44 PM
OK, who is going to be the first with 60" rims?.. man that is over doing it
furiousgtz
03-27-2007, 07:49 PM
gay...............
they should stop at 24
SkylineG1
03-27-2007, 07:54 PM
How dumb is this gonna get? You can't even run over a pebble on the street & not bend or crack those. :evil:
mattalicslvr8g02
03-27-2007, 07:55 PM
they hold 3 psi of air :wink: :lol:
Bezzle
03-27-2007, 08:07 PM
*speechless*
Proud Galant Driver
03-27-2007, 08:11 PM
gay...............
they should stop at 24
X2
mapid145
03-27-2007, 08:18 PM
so.. when u do get a flat or something rite.. then wat do u do..
Sleepervr-4
03-27-2007, 08:20 PM
I want to know how the fuck he gets in that thing :shock:
USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D
Kid
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg
02redgalant
03-27-2007, 08:22 PM
:smt017 dum
SkylineG1
03-27-2007, 08:25 PM
I wonder how much they paid for those rubberbands around the wheel?
GoldGalant [Reborn]
03-27-2007, 08:26 PM
USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D
Kid
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg
Still gay
G-spot
03-27-2007, 08:30 PM
First time I saw that I knew those were "Blade" rimz and knew it was in Houston Somewhere.
And yes, I have seen "Blades" 21s on a 9G around town :smt044
On the side note, that purple 3G behind it is sick!!! :shock:
mitsufan
03-27-2007, 08:50 PM
There aint no way in HELL you could pay me to put those on my G!!! That is the dumbest gayes crap I have ever seen in my entire life. I wonder when his ball joints or spindles are gonna snap and then hes gonna roll that damn thing. LOL you cant drive with the wind blowing at all.The tires do look like over-streached rubberbands about to snap. :roll: :smt078
]Still gayI'll give you that, however USA Motorsports is one to not be into things like that...
They're in the whole lowrider scene and in this case, the "I Can Do Better Than You Can" genre...
Hence Big ass rims are popular for some reason, and nobody's rocked 40", until now...
And when someone tries to out do them, USA will trump you again...
:D
Kid
seth98esT
03-27-2007, 08:56 PM
they hold 3 psi of air :wink: :lol:
I highly doubt the tires hold air. Probably just a band of rubber. Theres no way that thing could be driven at all on normal roads.
His wheels are bigger then my tv haha.
Alexey
03-27-2007, 09:37 PM
WTF... as you can see, bigger is not always better :smt075
4g63lover
03-27-2007, 10:09 PM
Gay
RedGalant2k1
03-27-2007, 10:19 PM
Whats the big deal....I'd rock a set :smt109
pinoyesv6
03-27-2007, 10:21 PM
even the amish are doing it
http://www.thespincycle.com/files/CarraigeRideLarge.jpg
frag_daddy_2007
03-27-2007, 10:25 PM
of course, the amish are old skool pimps!
Proud Galant Driver
03-27-2007, 11:43 PM
even the amish are doing it
http://www.thespincycle.com/files/CarraigeRideLarge.jpg
I think the Amish are doing it better too.
Diamndsr4eva
03-28-2007, 12:36 AM
]Still gayI'll give you that, however USA Motorsports is one to not be into things like that...
They're in the whole lowrider scene and in this case, the "I Can Do Better Than You Can" genre...
Hence Big ass rims are popular for some reason, and nobody's rocked 40", until now...
And when someone tries to out do them, USA will trump you again...
:D
Kid
X2 ^^Gold galant...still fucking gay
:smt018 :smt078
6G72gearhead
03-28-2007, 01:33 AM
even the amish are doing it
http://www.thespincycle.com/files/CarraigeRideLarge.jpg
I think the Amish are doing it better too.
I'll bet it'd win the drag race.
evil-G-nius
03-28-2007, 01:44 AM
Again I say DONK needs to disappear! The worst thing to ever happen to modding cars! Those rims cost more than the car! I mean seriously...it is fuck stupid looking! Flame that bitch
01galant01
03-28-2007, 03:09 AM
dat thing looks lik a monster truck....really ugly, maybe he should of just used the money to buy a new car
6G72gearhead
03-28-2007, 03:27 AM
I'd like to hit that thing with an HMMWV.
fatal1
03-28-2007, 07:37 AM
just change the rubberband when you get a flat, what is the point of that? looksd retarded
polishmafia
03-28-2007, 08:24 AM
the "I Can Do Better Than You Can" genre...Kid
they did a whole lot fucking worse. that is the stupidest mother fucking atrocity i have ever laid my eyes on.
Jeffylou87
03-28-2007, 04:04 PM
How does he jack it up to get those rims off? Axles are too low for a floor or shop lift... Hmmm :smt017
Kenneth G
03-28-2007, 04:52 PM
]
USA Motorsports is the company that made these rims. They're based out here in San Antonio off of San Pedro. They are the ones who molded my kit and installed my spoiler and airbag setup...
Owner's name is Gilbert. They do quality work...
:D
Kid
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_130_full.jpg
Still gay
x30
shortdogg2k05
03-28-2007, 05:21 PM
Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!
Kenneth G
03-28-2007, 05:35 PM
Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!
lol, well at least they dont spin too, or float, or any of that other crap... that would be cause for an immediate air strike on that vehicle.
mattalicslvr8g02
03-28-2007, 05:41 PM
Give me a ladder so I can slap the driver. I hate BLADES!!!!!!!!!
lol, well at least they dont spin too, or float, or any of that other crap... that would be cause for an immediate air strike on that vehicle.
it causes 1000lbs of thrust :wink: :lol:
IceDouTGaLanT
03-28-2007, 08:19 PM
:roll: bigger always doesnt mean better
surycdrol
03-28-2007, 08:23 PM
who is going to be the 1st to rock a set of these on their G :shock:
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs1.jpg
http://i82.photobucket.com/albums/j255/marcos_65/40Dubs2.jpg
http://i118.photobucket.com/albums/o91/prohopper1/40susamotorsports.jpg
http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg
Have fun stopping with all that rim, and those little ass brakes
evil-G-nius
03-28-2007, 10:50 PM
I was just thinking the same thing at this very second! I cant even see the damn brakes!
frag_daddy_2007
03-29-2007, 12:41 AM
it has brakes!? :shock:
i dont even see brake lines, you know that that cant be driven around much
AVERAGE
03-29-2007, 02:08 AM
The term "fucking ridiculous" comes to mind :lol: Im guessing that's just a show piece.
mattalicslvr8g02
03-29-2007, 05:51 AM
http://i118.photobucket.com/albums/o91/prohopper1/d2.jpg
Have fun stopping with all that rim, and those little ass brakes
looks liek he has drums :roll: :?
DOHCstunr
03-29-2007, 08:21 AM
talk about a fucked up gear ratio.
that engine is going to be lugging in evey gear.
not that i'd drive that car above 0 mph
skyhigh90210
03-29-2007, 03:22 PM
What size disc do you think it will take to stop that thing?
mattalicslvr8g02
03-29-2007, 03:25 PM
15" +
RedGalant2k1
03-29-2007, 03:33 PM
talk about a fucked up gear ratio.
that engine is going to be lugging in evey gear.
not that i'd drive that car above 0 mph
Why?
Those old chevy 350s (which is likely what it has) have plenty of low end power. The only issue is the gearing of the axles, but I suspect those are dana44s which can more the adequately handle something with that much rolling mass. It could also have a old strong chevy 10-bolt rear axle which also can handle turning those things easily.
Not that I'd care to ever drive it, just stating that its easy with the right engine and drivetrain combo, even being unmodified.
DOHCstunr
03-29-2007, 03:34 PM
i just like that therre is no suspension whatsoever.
the fabrication they did to allow for such an obomination
involved nothing more than welding a bunch of steel so they woudl ahve clearance.
no shocks, no springs.
so gay
mattalicslvr8g02
03-29-2007, 03:40 PM
i just like that therre is no suspension whatsoever.
the fabrication they did to allow for such an obomination
involved nothing more than welding a bunch of steel so they woudl ahve clearance.
no shocks, no springs.
so gay
thats the wrong and cheap way of doing it, the right way(which ive helped on) is to get an actual truck suspension & spindals then you extend and weld innew metal in the control arms and trailing arms.. ... ill try to find a pic od the car i helped work on
EDIT: I found a pic, the car right next to it is a s-class benz just to give you an example of how high it is.. it is lifted 6inches and it has 26's on it
http://img396.imageshack.us/img396/3927/lda0dd89476ed6c03d7d526pg1.jpg (http://imageshack.us)
bmxmike
03-29-2007, 05:19 PM
Thats ridiculous its a waste. Cause he probably ended up payin around 8k to do all that or so, considering if those rims are any good im sure it was at least bout 4k or more for them. And to get all the fab work and new axles cause they usually by hummer axles and hook them up, (only now cause my friend tried to do it once). Waste of money.
RedGalant2k1
03-29-2007, 09:06 PM
Thats ridiculous its a waste. Cause he probably ended up payin around 8k to do all that or so, considering if those rims are any good im sure it was at least bout 4k or more for them. And to get all the fab work and new axles cause they usually by hummer axles and hook them up, (only now cause my friend tried to do it once). Waste of money.
I'll give you money if you can find a set of new 26" Gianelle 5-holes with 305/30-26 Pirellis for less than $4000. I've never seen anyone get 26s for less than $6000.
jhunter
03-30-2007, 07:12 AM
Hey, hey, maybe he just wanted easy access to the oil pan... :roll: :P
Fishboy55
03-31-2007, 08:09 PM
Without a doubt the most ridiculous waste of time and money to be posted in quite some time. Looks like shit, and undoubtedly drives like shit (if it drives at all). Easy to change the oil though :lol: What a dumbass....
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_258_full.jpg
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_259_full.jpg
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_260_full.jpg
On the side note, that purple 3G behind it is sick!!! :shock:
http://memimage.cardomain.net/member_images/10/web/442000-442999/442721_256_full.jpg
Kid
G-spot
04-03-2007, 09:04 PM
^ Was that a 3G or a figment of my imagination :shock:
Xska55
04-05-2007, 02:53 PM
WOW! Im speechless, I personaly dont care to much for it but I do apprciate when people are always willing to put in the hard work and thought process to out do the next guy.
vBulletin® v4.2.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.