thealliance43
04-15-2007, 05:52 PM
First off I would recomand everyone whose trying this to get an extra pair of your headrests due to YOUR NOT A PROFESSIONAL.... but then again maybe you are! :lol:
items needed: Headrests.... a ruler....washable marker.... box cutter...
self drilling screws....and a power drill.
http://img264.imageshack.us/img264/8880/04110715041zz2.jpg (http://imageshack.us)
1st line up your monitor housing so it's perfect on all sides.... (USE THE RULER TO HELP AND MARK OFF WITH THE MARKER) you should make a box around the housing. THAT'S GOING TO BE USED AS YOUR OUTLINE
http://img460.imageshack.us/img460/2196/04110715042pm0.jpg (http://imageshack.us)
http://img460.imageshack.us/img460/7001/04110715081nx1.jpg (http://imageshack.us)
2nd: After your happy with your outline....cut an "x" in the box area and pull the 4 pieces back. DO NOT CUT THEM OFF.
http://img402.imageshack.us/img402/4429/04110715082je3.jpg (http://imageshack.us)
3rd: Start hacking at the stuffing in the headrest until you get to the bar. THIS WILL TAKE SOME TIME.
http://img402.imageshack.us/img402/6733/04110721411ku3.jpg (http://imageshack.us)
http://img401.imageshack.us/img401/2573/04110721412lu0.jpg (http://imageshack.us)
http://img402.imageshack.us/img402/7355/04110721411lx4.jpg (http://imageshack.us)
4th: put the housing in your headrest and run the wire down so its by one of the two poles.
5th: After your happy with how the housing is situated drill your screws in the housing.
6th: Now with the 4 pieces put those in the housing and then the monitor. This makes the plastic housing not show at all. And with that you have your headrest monitor.
http://img339.imageshack.us/img339/3472/04110721401bb6.jpg (http://imageshack.us)
Becareful and precise i'm NOT held responsible for your actions. :lol: :lol:
I Forgot to take some pix but for the most part you will understand it if its infront of you
items needed: Headrests.... a ruler....washable marker.... box cutter...
self drilling screws....and a power drill.
http://img264.imageshack.us/img264/8880/04110715041zz2.jpg (http://imageshack.us)
1st line up your monitor housing so it's perfect on all sides.... (USE THE RULER TO HELP AND MARK OFF WITH THE MARKER) you should make a box around the housing. THAT'S GOING TO BE USED AS YOUR OUTLINE
http://img460.imageshack.us/img460/2196/04110715042pm0.jpg (http://imageshack.us)
http://img460.imageshack.us/img460/7001/04110715081nx1.jpg (http://imageshack.us)
2nd: After your happy with your outline....cut an "x" in the box area and pull the 4 pieces back. DO NOT CUT THEM OFF.
http://img402.imageshack.us/img402/4429/04110715082je3.jpg (http://imageshack.us)
3rd: Start hacking at the stuffing in the headrest until you get to the bar. THIS WILL TAKE SOME TIME.
http://img402.imageshack.us/img402/6733/04110721411ku3.jpg (http://imageshack.us)
http://img401.imageshack.us/img401/2573/04110721412lu0.jpg (http://imageshack.us)
http://img402.imageshack.us/img402/7355/04110721411lx4.jpg (http://imageshack.us)
4th: put the housing in your headrest and run the wire down so its by one of the two poles.
5th: After your happy with how the housing is situated drill your screws in the housing.
6th: Now with the 4 pieces put those in the housing and then the monitor. This makes the plastic housing not show at all. And with that you have your headrest monitor.
http://img339.imageshack.us/img339/3472/04110721401bb6.jpg (http://imageshack.us)
Becareful and precise i'm NOT held responsible for your actions. :lol: :lol:
I Forgot to take some pix but for the most part you will understand it if its infront of you