View Full Version : cutting cyber2 front bumper?
dknight3
04-20-2007, 02:14 AM
has anyone cut those things off the cyber2 front bumper that stick up and go where your grille is supposed to go?
cause i want the cyber2 bumper, but i also want a grille.
if i cut them off and then fiberglassed the gaps would i be able to use jdm heads and grille and not have any fitment issues?
mrjaydeeone
04-20-2007, 02:47 AM
I have the cyber 2 kit and JDM headlights. The headlights acutually hold the bumper to the car with those 2 parts that stick up. I know there is a member on here with a shogun front bumper, and he took a stock 99-01 grille and just trimmed it at angles on either side and wedged it in to the opening. Also there is the USDM version of the cyber 2 bumper which you still use the stock 99-01 grille like this
http://i37.photobucket.com/albums/e74/colombiancutie04/DSC01426-1.jpg
dknight3
04-20-2007, 02:11 PM
do you know where i can get that from?
mattalicslvr8g02
04-20-2007, 02:24 PM
here you go .. with this bumper you use stock headlights and 99-01 grille
http://www.extremedimensions.com/4957.html
dknight3
04-20-2007, 07:20 PM
i wonder how much gap there would be with jdm heads and grille..
mattalicslvr8g02
04-20-2007, 07:21 PM
there is only a gap with the jdm molded bumper (with the points) if you use the u.s headlights
dknight3
04-21-2007, 03:09 PM
oh there is no gap with jdm headlights and us bumper?
sombody told me there was...
komodo
04-21-2007, 03:16 PM
there is only a gap with the jdm molded bumper (with the points) if you use the u.s headlights
He just stated that there is a gap while using USDM headlights with the JDM bumper...
Uh some site, I forgot which, even suggested you get the JDM headlights for the JDM bumper. This is most likely for no gaps and it'll lay flush. Just my assumption though.
vBulletin® v4.2.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.