jdm heads problem!

[hsinya]

trying to put on jdm heads, the passenger side headlight is touching the a/c compressor (or whatever it is) thats right behind the lowbeam bulb. its sitting inside a circular cutout with hardlines attached so its not like i can move it. or can i?

how did u guys do it? i loosened the bracket for the a/c and adjusted it a little bit but i can't move it any more. i'll try to get some pics up later tonight.

[S-Line]

Yea get some pics when u can. I have the same problem w/ my passenger side. I got the drivers side perfect but the other is off by like 2 cunt hairs :lol:

[6G72Galant]

Cut into the frame a little more. I have about an inch between my passenger headlight, and the compressor. Thats because the guy at the shop cut a significant portion of the frame so it would fit.

[unlimited6986]

If your talking about the lil metal poles just push them back

[gtx]

This?
http://i54.photobucket.com/albums/g93/OneBlackGTZ/jdm%20heads/th_100_7310.jpg (http://i54.photobucket.com/albums/g93/OneBlackGTZ/jdm%20heads/100_7310.jpg)

I myself trimmed the plastic on the headlight where it hits it. The rubber gromet still sits on it just fine. Or you could just bend the line I guess.

[SkylineG1]

2cunt hairs

:smt005 :smt005 :smt005

[rolling]

This?
http://i54.photobucket.com/albums/g93/OneBlackGTZ/jdm%20heads/th_100_7310.jpg (http://i54.photobucket.com/albums/g93/OneBlackGTZ/jdm%20heads/100_7310.jpg)

I myself trimmed the plastic on the headlight where it hits it. The rubber gromet still sits on it just fine. Or you could just bend the line I guess.
thats what i did i cut the plastic on the head light and the seal to

[fatal1]

yea you just push them they bend easilly just be gentle and not too far

[zobgel]

you don't have to cut the plastic on the headlights just bend it easilly but don't get crazy.......

[hsinya]

gtx thanks for the pic! thats exactly what i'm talking about.

[Reelax]

mine sit right up against those lines.