PDA

View Full Version : Quick question about speaker wiring



Ahnima
06-26-2007, 11:06 PM
I just put new 6x9s in the back and i couldnt tell which one was positive and which was negative coming from the car.
Is the wire with the white line the positive and the one without the line the negative?
Thanks

lonestar22
06-27-2007, 12:38 AM
the only way i could tell is if u connect it one way both speakers in the back sound quieter than if u connect it the right way

Ahnima
06-27-2007, 02:10 AM
I tried them both ways when I was putting them in but couldnt tell a difference in sound.
What is the right way to hook them up?

Fishboy55
06-27-2007, 05:43 AM
Per the service manual....wiring colors are the same for four or seven speaker system:

Left Rear Positive - Yellow/Blue
Left Rear Negative - Gray/Blue
Right Rear Positive - Yellow/Red
Right Rear Negative - Gray/Red

Ahnima
06-27-2007, 11:57 AM
The wires coming from the car for me are the same for both left and right speakers.
One of the wires is clear and the other is clear/white.

DOHCstunr
06-27-2007, 12:10 PM
the wire with the stripe(on generic speaker wire) is always the positive.

Ahnima
06-27-2007, 12:13 PM
Thats what I thought... Thanks

Fishboy55
06-28-2007, 05:56 AM
the wire with the stripe(on generic speaker wire) is always the positive.
Well, it's designed to be that way, but obviously someone has rewired the speakers with generic wire, so there's no way to tell which wire they hooked up to the positive side at the amplifier end. So basically you have a 50/50 shot.