2.75" exhaust too big?

[4g63lover]

Ok, its about that time I change up my exhaust. I want to run either a 2.5 to a Tanabe Tuner Medallion hyper spec muffler or a 2.75 to a Tanabe Muffler.

Is 2.75" too big for my 4G64?

this is the muffler:
http://www.performancecenter.com/graphics/tnb/tnb_hyper.muffler_500.jpg

and I will get the piping done by a local speed shop.

[Kalamidad]

It's way too big of a far can. That has been the consensus for years. the stock is 2.25 and appear to be perfect, unless your car is forced fed.

[thebirdman13]

largest i would go on an N/A 4 banger would be 2.5"

[Reelax]

piping 2.25 NA I4, up to 2.75-3.0 if you are HEAVILY boosted.
muffler size isn't as important as piping size. you could run a 2.5 inlet 5" outlet and it wouldn't make much of a difference performance wise.

[unlimited6986]

im a 4 banger w/ 3 inch

[4g63lover]

im a 4 banger w/ 3 inch
your legacy is turbo'd though.

[unlimited6986]

yea lol id say go w/ 2.25

[mattalicslvr8g02]

dad has header, stock flexpipe and 2.5 all the way back with a high flow cat and 2 mufflers... with no problem.. I wouldnt go any bigger though.... its kinda pointless.. unless your going to be force fed in the future