60MM TB rewiring

[mitgalantes]

im about to get a 60mm tb for the G..since i live in a state with cold winters (PA) im guna need to rewire the vaccum lines or i will have a stciky TB and possibly a vaccum leak wich i dont want to have..so if any one could help me please help me ha

thanks:mitgalantes

[RacerX4g64S]

Hey it simple just do a search and follow directions. I did this a few months ago well worth it.

[bmore303]

Yeah it's very simple. I'm using a 60mm N/T TB with my setup, just have to extend your vacuum lines to reach the nipples that are now facing the opposite direction. Take out an impact driver and take off the 1g IAC and swap it with you 7g IAC. You'll have to fill in one of the screw holes since now it will just leak air and fill in part of one of the coolant channels. Pretty sure you can figure out which parts those are when you get to it.

[mitgalantes]

hahah took a whole year to get this thread responded too..this ones old some one can close it

[bmore303]

Wow....failure, shame on me :(