i know is a repost, but pleasesssss help

[galant350z]

i tried to do some research first before i decided to post this. i found similar problems but not exactly the answer and no way i am going to guess.

i have a set of enkei RP03 18x8.5 offset 35 FRONT, 18x7.5 offset 48 REAR.

i actually had 7.5 all the way around it looked awesome, i bought a set of BBK 330x24, and with the offset 48 it wont clear it...

so i bought 2, 8.5 offset 35 for the front, now is sticking out too FAR,

it just get to the point that i cannot stand it any more because it looks so groofy. i am planning on putting the 8.5 to the Rear and order 18x8 offset 40 for the front, do you guys think it will clear my 330x24 BBK, should i just sell them all and buy a new set of rim to prevent future problems?

again sorry if i repost this, now i am just getting so exhaust about the problem, i love the 8g, unfortuately i do not have the knowledge,

thanks

sunny

[qnz]

measure how much space you have from the back of the spokes to the caliper. say you have 6mm to play with. bring the wheel to a machine shop, ask them to mill 4mm off the back of the wheel. now the wheels will sit in a little more and still clear the caliper. If they still stick out, toss some negative 2 degree camber up there.

other than that, its just hit or miss when buying wheels and seeing if they will clear the calipers or not.

[gtx]

what bbk you have there btw?

[galant350z]

what bbk you have there btw?

rotora 330x24

[RedGalant2k1]

Well do you have larger calipers too? Or just a big rotor kit?

[9G]

try to get the same size wheels. even if its sticking out alittle bit, they are the same.

[galant350z]

Well do you have larger calipers too? Or just a big rotor kit?

big rotor and big 4 piston calipers,