Kia head timing!?!?!? help!

[duh2150]

i been looking around and i didnt find anything abotu the kia/evo head timeing for the cams, so my question is witch way do the marks on the gears point? i tryed pointing them at each other but they would make the exhaust and the intake valves open at the same time, i was planing on getting evo 272 cams for it and adjustable came gears, would that make the point differnt at a differnt place?

also when i tighten the cams down the valves come out about 1/8 inch why is that? i was thinking it was the lash adjusters..

anything will help thanks!

[4-G-rim]

There should be a outside mark on the cam gears and they should be facing in the 12 o clock position..this represents TDC (Top Dead Center). You also have to make sure the crank and oil pump marks are lined up too.

Here is a VFAQ on how to set timing.
http://www.vfaq.com/mods/timingbelt-1G.html

[duh2150]

yeah i put the timing marks at each other and it ownt work liek that becasue if it ran it would open all 4 valves nut jsut 2, i got the kia cams.. would it change if i got the 4g63 evo cams?