question about fitting rotora BBk

[galant350z]

i just called my vender to place the order for rear rotora, he told me the rear rotora bbk will only work for galant with rear disc models, it will not fit on rear drum brake model, is that true?

because i already have rotora 4 pot front, if i cant swap the rear then i will have uneven braking? i did alot of research here and there are a lot of people who done that before.

input please.


sunny

[n3oAcid24]

its true man. you need the set up for rear disk brakes. you cant just put on some disk on top of drums.

[galant350z]

its true man. you need the set up for rear disk brakes. you cant just put on some disk on top of drums.

are there anyways that can be done?

thanks

[n3oAcid24]

yea man.... you should of stood a little bit more at the meet man. would of learned a thing or 2. i switched my rear drums to disk. all you have to do is get the right parts. i can help you install them too if need be.

[9G]

buy a rear disk brake setup and swap.

[02redgalant]

nahhh,your gonna have to get swap from a v6 galant about $150 give or take depending were you get it from

[galant350z]

nahhh,your gonna have to get swap from a v6 galant about $150 give or take depending were you get it from


so there is no way i swap the rotora, it has to be a v6 galant?

[n3oAcid24]

you can put a big brake kit on but you need the assembly for the rotors man.

[galant350z]

you can put a big brake kit on but you need the assembly for the rotors man.

man thats gonna be alot of stuff then, god

[n3oAcid24]

you can put a big brake kit on but you need the assembly for the rotors man.

man thats gonna be alot of stuff then, god

not really. you will need the backing plate, bolts, and maybe the ebrake cable. you are going to buy the kit so that is basically.

[ScottsNCGalant]

I have the same set up you have...I have a Rotora bbk in the front, but you do need the rear disc swap to put the bbk in the rear...do you have some pics of your set up? Have you been talking to Lynn at Rotora?

[Proto]

You need the hubs and the ebrake cable only if it comes with the rotors, calipers, brake lines, etc.

[galant350z]

I have the same set up you have...I have a Rotora bbk in the front, but you do need the rear disc swap to put the bbk in the rear...do you have some pics of your set up? Have you been talking to Lynn at Rotora?

pm sent,

[ScottsNCGalant]

I have the same set up you have...I have a Rotora bbk in the front, but you do need the rear disc swap to put the bbk in the rear...do you have some pics of your set up? Have you been talking to Lynn at Rotora?

pm sent,

Responded