Just a little teaser...

[2kgalant]

Test fitted some Work VS-XXs today. The set is a 19x8.5(front) and 19x9.5(rear). Offset +42. Only have pics of the rear from today...
http://i5.photobucket.com/albums/y195/gqgalant/10-24-07_1342.jpg
http://i5.photobucket.com/albums/y195/gqgalant/10-24-07_1339.jpg
Now i know many of you guys said it wouldn't work...but the shop believes that we can. Currently, on the rear there is a 235/35/19. We are going to be changing that to a 225/35/19 just like the front. Fenders will also be rolled too. Anyways, these won't be on for a while. I still have to save up. The owner of the shop gave me such a good deal that i can't pass this up...no matter how long it takes me to save :lol:

[mattalicslvr8g02]

looks great to me

[dknight3]

WOW, beautiful.

[ChuloMxcn]

awesome!!!!!

[lnkn52]

nice, start saving :D

[IceDouTGaLanT]

awsome wheels, trust me you'll love them how much u paying? i paid 2800 shipped for mines with tires. WOW the 9.5 rear lip is HUGE!!

[mrjaydeeone]

wow. very nice. cant wait to see some more pics for the full effect

[2kgalant]

awsome wheels, trust me you'll love them how much u paying? i paid 2800 shipped for mines with tires. WOW the 9.5 rear lip is HUGE!!
This set retailed for like 4300 brand new. It was used for a show then taken off by the previous owner. You won't believe it, but i was quoted 2800 for this set :D :D :D

[IceDouTGaLanT]

thats a great deal...jump on it lol i charged it on my card, and i have only 300 left to pay off woot!!!

[wyliescott]

do it bro! those are soo fuckin sick, those are my next set...as soon as i can find the right offset!

[Xavier22]

tight, homie - they look good w/ the metallic silver of your g

[XxGiRLaNT06xX]

Those wheels look perfect! Very hot!

[SleekGTZ]

Yeah! Very nice looking man.

[rollingwithdubz]

work wheels are classy as hell...

[Jeffylou87]

:shock:

[RedGalant2k1]

The only way a 9.5" wheel can fit in the back of the Galant is with fender flares, or modified rear knuckle. Not saying it isn't a 9.5" wheel, but I would doubt it.

I'd recommend something a bit wider than a 225 on a 9.5" wheel, infact I'm surprised you can get a 225, or even 235 to bead on a 9.5" wheel. Considering the tire itself is not even 9" wide.

Nice wheel nonetheless.

[Strizi81]

:shock: Very nice man 8)

[2kgalant]

The only way a 9.5" wheel can fit in the back of the Galant is with fender flares, or modified rear knuckle. Not saying it isn't a 9.5" wheel, but I would doubt it.

I'd recommend something a bit wider than a 225 on a 9.5" wheel, infact I'm surprised you can get a 225, or even 235 to bead on a 9.5" wheel. Considering the tire itself is not even 9" wide.

Nice wheel nonetheless.
I know that it may seem like it won't work, but after putting it on, it actually might. I know it may seem kind of extreme, but we will be rolling my fenders and probably going to slam the coilovers so i can get more camber. I have seen this setup work on other cars with similar offsets to ours. The 225/35/19 will work, just going to be a slight stretch on the tire. My friend has actually run this tire on a 19x10, it looked sick! Anyways, i will let you guys know how it goes. We are going to try to really hard to make these fit...the deal is just too good to pass up!

[xglantv699]

Hott wheels! They look goood!! :D

[Reelax]

watch out for the rub on the damper. my 19x8.5 VOLKS (+48mm) have touched my rear dampers (TEIN SS-P) on full compression when my rear was not camber corrected. it is VERY tight back there. 19x9.5 +42 (actually 6.6mm closer to the damper) may fit when static but remember the suspension arcs in the rear during travel... the lower you go and the more negative camber the more chance for the inside of the rim to cut the damper; alternatively, camber corrected, it will be very hard to fit those wheels under the fender... remember, my fenders are not just rolled, they are CUT out and i only have about a pinkie clearance to the lip on compression (2.5"-2.75" drop in the rear).

[2kgalant]

watch out for the rub on the damper. my 19x8.5 VOLKS (+48mm) have touched my rear dampers (TEIN SS-P) on full compression when my rear was not camber corrected. it is VERY tight back there. 19x9.5 +42 (actually 6.6mm closer to the damper) may fit when static but remember the suspension arcs in the rear during travel... the lower you go and the more negative camber the more chance for the inside of the rim to cut the damper; alternatively, camber corrected, it will be very hard to fit those wheels under the fender... remember, my fenders are not just rolled, they are CUT out and i only have about a pinkie clearance to the lip on compression (2.5"-2.75" drop in the rear).
Yeah, we still got a lot of issues to work out. Im really just trying to remain optimistic...but i know it will be hard to fit these. Man, i can't tell you how much i wanted these after i actually saw them on my car. Damn, if i had some Air Runner supspension then these would be no problem :lol:

[Proud Galant Driver]

Those rims look tight.

Good luck.

[alexvr]

DAM!!! the rims look sick amd the lip is soo nice!!! i wish u would of tooken more pics but looks great and let us kno wat happens and if they do end up fitting, we want to kno HOW U DID IT lol....good luck

[2kgalant]

Sorry guys, i should have taken pics of the front too...but i did that the week before and i didn't take pics. The front 19x8.5 actually fit good in the front. Man...always issues with the damn rear fenders :x :x :x

[9G]

9.5 :shock: :shock: :shock:

[SkylineG1]

9.5 :shock: :shock: :shock:

yep 9.5

[fatal1]

those are sick bro, hopefully you can get them to work with no problems

[Alexey]

there was a thread on wider back wheels awhile back... love the look! save, buy, put on, and post pics!!! looks great from what i see! :D