stolenstapler86
12-04-2007, 11:22 AM
So I just got done putting my new gr2's in and threw the car on the alignment rack. the camber on both sides turned out fine at -0.4 and -0.3 left to right in the front and -1.4 and -1.3 left to right in the rear. toe was solid at .04 total.
the caster however looks like it might be a problem. I haven't noticed any pulling at all but according to the rack it's at 3.2 degrees on the right which is high normal and 1.6 degrees on the left which is kinda low. I took a look around but I couldn't see anything obviously bent. anyone got any ideas?
the caster however looks like it might be a problem. I haven't noticed any pulling at all but according to the rack it's at 3.2 degrees on the right which is high normal and 1.6 degrees on the left which is kinda low. I took a look around but I couldn't see anything obviously bent. anyone got any ideas?