Camber kit for the 8g?

[NRG]

I was wondering which camber kit did you guys get and how much? I got Progress springs so that would be 2-2.2" drop so I would say maybe a -2 or a -3 degree camber. Some say I might not need it but I was thinking just in case so atleast this way I can install everything at once and not have to worry about it anymore.....

[burthold]

I installed a camber kit for a 2.2 drop and I'm still off a little in the rear. Remember, they can always add another washer in the back to help get you back to true.

Wes

[Messiah]

Since you got the progress springs...I suggest you go with the progress camber kit. they're suppose to be a match.

[NRG]

Yes but I need a definite answer on if they will fit the 8G for sure......And do they do more than 2 degree adjustment...Do they have front and backs....etc.....

[Messiah]

As you can see in my sig, I have an 8G. I have the progress Spring and the Progress Camber kit. It's for front and rear.

[NRG]

Looking at your sig, I noticed that your rear looks way lower than your front. Isn't there a way to make the car slight towards the front instead of the rear?

[Messiah]

that's because the rear well sits slightly lower than the front. I guess it's that way so that when you turn it has clearance...altough, sometimes when I make a quick sharp U-turn, the front wheel hits the fender. But I assure you the car is at even height fron and rear. And besides, you don't want the car looking like a hotrod https://www.thegalantcenter.org/style_emoticons/default/laugh.gif

[Messiah]

you can also see a close of the wheels if you click on "My Page" in my sig.

[NRG]

Well thats the thing, I want the front to be slightly lower than the rear......that would look much better in my opinion.....

[Messiah]

you could probably cut the spring. But that's something I don't recomand or do myself. I believe Reelax has cut springs, but he's got the pro kit I think.

[NRG]

but seriously, in the pic your car does look like the rear is lower......I am looking at your avatar pic the little one......

[HeadAche]

My back end sits lower than the front on Intrax springs.. I didnt get the camber kit because the wheels are a a degree where the back end will not want to come around at high speeds or on turns..

[Lazarus]

try here boss there is a spot for the Camber Kit I think.

http://www.raniworld.com/raaa/tgc8gparts.html ('http://www.raniworld.com/raaa/tgc8gparts.html')

[blakstarz73]

Well, even before the drop. The back of the Galant was always lower in the back than in the front. I have Progress springs too and the drop was 1.8 (back) 2.0 (front). so if you want to get the front lowered even more, I guess you will have to go with a 2.2 drop. When I drop the back and front, the back was even more lower.

[Mgalant99]

Ok, heres one for you. I have the gc coilovers. What camber kit should I get?? The rear is the only place that needs it.

Thanks,

Dan

[Danger DANJ]

I would get an Ingalls camber kit for the rear. That's what I have along with Progress springs. If you go to groupbuycenter.com you can find the kit for a pretty good price (usually listed under Eclipse).

[NRG]

But can Ingalls do more than 2 degrees??

[Danger DANJ]

<div class='quotetop'>QUOTE(NRG)</div><div class='quotemain'>But can Ingalls do more than 2 degrees??</div>

The 3586 kit fixed my -2 degrees camber in the rear with spacers left over. On their website it says that the kit can fix up to a -3 degree camber. I don't think you are planning on dropping more than 3" in the rear are you? Click here ('http://www.ingallseng.com/parts/3586.html').

[NRG]

Did you get some for your fronts or were they not needed??

[Danger DANJ]

<div class='quotetop'>QUOTE(NRG)</div><div class='quotemain'>Did you get some for your fronts or were they not needed??</div>

I didn't need anything for the front, and that's with a 2.25" drop. I'm sure if you were to drop lower, there would be a need for a camber kit up front though.

[BGR]

The progress springs won't lower an I4 no more than 1.8"
You'll only get a 2"+ drop on the V6.

[NRG]

I saw on the site that they charge 78 bucks per side?? Thats kinda pricey........Shouldn't that price be for a pair?

[Danger DANJ]

<div class='quotetop'>QUOTE(NRG)</div><div class='quotemain'>I saw on the site that they charge 78 bucks per side?? Â*Thats kinda pricey........Shouldn't that price be for a pair?</div>

That's why I suggested www.groupbuycenter.com where I bought mine. I got the rear set for like $90 shipped.

[NRG]

I searched the groupbuycenter but didn't come up with the kit that will fit my car. I didn't see any 2000+ eclipses nor Galants....

Which one did you buy it for?