paparishi90's turbo build

[paparishi90]

*Update*
I am back in the turbo game except this time my turbo will not taunt me every time i see it collecting dust in the garage. I have a total of 18 days before college starts up again so lets see if I can be boosted by then :)

Ok so it seems as if everyone has one of these if they are planning to go turbo so here is mine.
I just started collecting my parts and here is what i purchased so far.

Purchased:
Tearstone turbo manifold with a t3 flange (thanks Stewi)
Garrett T3/T4 turbo with .48 a/r 46 trim
oil return and feed lines
450 cc DSM injectors
resistor box
FMIC (installed but a pain with crash bar still on)
innovate lc-1 wide band o2 sensor
boost, oil pressure, oil temp, egt gauge
universal pillar mount
oil sandwich plate adapter
3" mandrel bent catback exhaust w/ 3" magnaflow muffler
tial 38mm wastegate
HKS super SQV blowoff valve
aeromotive fpr
walbro 255
turbosmart manual boost controller
NGK Spark plugs 2 heat ranges colder
intercooler piping, silicon hoses, clamps

Need to purchase very soon:
custom dp (starting that today 8/03/09)
evo 8 ecu
evo 8 boomslang harness
tactrix cable 1.3

and other stuff that I may have forgotten to write up here
Oh ya and I'm 5 speed over a year now!

[seth98esT]

Sounds like a healthy setup so far. Post up some pics! Keep us updated :)

[spdracr]

good luck on this and i hope u got some deep pockets for this lol

get some pics and i should get some pics of mine too lol

[paparishi90]

Yes indeed this is getting very expensive but it's better to do it right the first time, I learned that from many members here, Galantforums, and my local shop. I was initially gonna go the ebay route but i heard that it was not such a good idea.

[JDM4G64T]

good luck on this and i hope u got some deep pockets for this lol

get some pics and i should get some pics of mine too lol

Was thinking the same thing.....haha. Fun is expensive!!

[Stewi]

Ummm if your gonna keep the stock ECU and run emanage just make sure you get a BOV that can be recirculated. I dont know much about the HKS SQV, but just make sure you can recirculate.

[paparishi90]

ya it can be recirculated there is a kit for it, but i might do a gm maf and a maft

[run1206]

good to see another build in progress. good luck to you :D

[kbeast]

what sparks are u using 2 degress cooler?

[paparishi90]

Ya that is my plan but i'm gonna look a bit more into that before I get them.

[paparishi90]

*Updated*
I will get pics as soon as school is over next monday... and when I get the rest of my parts in the mail.
Just got my turbo today :)