PDA

View Full Version : car shakes when when I step on the breaks



murlopaz
06-03-2008, 04:08 PM
My car vibrates( especially at a high speed) when I step on the breaks. I changed both rotors and break pads (front).
It was doing the same thing before the change.

Seems that the problem is comming from the right wheel, since I tested it.... couldnt quite figure what is wrong though.


-dan

Galant306m
06-03-2008, 04:09 PM
Rotate your tires sounds like they are Cupping and need to be balanced.!

run1206
06-03-2008, 04:46 PM
mine were doing the same today, definitely gotta balance the tires :(

airborneparainf82
06-03-2008, 04:50 PM
thats weird it only shakes when the brake is applied, and that the brake/rotor change didnt help...

RAZ_76
06-03-2008, 04:58 PM
Sounds like warped rotors, even if you did replace the rotors but didn't brake the pads in correctly, you are back to square one.

airborneparainf82
06-03-2008, 05:01 PM
yeah that was my problem with the exact same issue. New rotors and pads fixed that right up

Silverfoxx_GTZ
06-03-2008, 05:20 PM
I've actually bought a pair of rotors from o'reillys before that were warped enough to give me a shudder. Might try having the surface skimmed.

RED2KESV6
06-03-2008, 06:04 PM
My car vibrates( especially at a high speed) when I step on the breaks. I changed both rotors and break pads (front).
It was doing the same thing before the change.

Seems that the problem is comming from the right wheel, since I tested it.... couldnt quite figure what is wrong though.


-dan

I had this same problem, and it was the lower control arm bushings gone bad. It's the high speed vibration while braking fairly hard that tells me it's not a warped rotor, plus you just replaced the rotors. If you don't get that same kind of vibration when coming to a stop from low speeds it's not a rotor problem. There's a TSB for the 2000G regarding this-search for 'brake judder'.

guynlidia2006
06-03-2008, 06:05 PM
also check out your rear brakes.. could be coming from there...

ChiGalant
06-09-2008, 06:33 PM
see if you lower or upper controle mount ( cant remember which the G has) Bushing are good they could be out and need replacing, had the same problem but not with my 8g it was an olds,,, hope this helps