PDA

View Full Version : is anyone interested in these dual projector heads?



depoautolights
08-24-2008, 11:42 AM
https://www.thegalantcenter.org/showthread.php?t=30506

They have been laying around the warehouse, the mounting tabs are broken but the headlights can still mount just fine. They are brand new. Reasonable offer and it is gone.

dknight3
08-24-2008, 06:58 PM
would it be possible to open up my 2 piece lights and swap the insides? or do you have any idea?

depoautolights
08-25-2008, 12:03 AM
hello i am a little confused here, can you kindly elaborate on what you mean? thanks.

dwjp90
08-25-2008, 12:31 AM
he wants to take his 2pc jdm open them up and remove the reflectors and stuff, then swap the projectors from yours in

and no idt tha its possible, unless you want to cut out the insides and swap

depoautolights
08-25-2008, 02:54 AM
if you take out the rear cover from your own headlights and replace with the one on the projector headlights, then the mounting tab issue should be fixed. i guess that would mean taking the interior projector headlights i have now and replacing the interior of your current headlights.

depoautolights
09-04-2008, 03:10 PM
https://www.thegalantcenter.org/showthread.php?t=30506

still have the headlights (link above to vendor sale section), any reasonable offer takes it. they are jdm 2pc with DUAL HALO projectors. the halos are green but can always be changed out to white or completely taken out. if reasonable offer, i will throw in a jdm 1.1 grille for free. you can check our site to see what the grille looks like.

http://depoautolights.com/mitsubishi-galant-grille-p-481.html?osCsid=a79d40cdf2782fbc62261636074e3598

hellk4t
09-04-2008, 04:02 PM
I'll post in here again if im gonna have the money for these.

depoautolights
09-04-2008, 04:18 PM
not a problem, just let me know. you can PM me an offer and i may let them go.

DNSerrano
09-05-2008, 07:25 AM
Do the headlights come with corners? More specifically amber corners?

depoautolights
09-05-2008, 11:31 PM
Do the headlights come with corners? More specifically amber corners?

yes they do. headlights and amber corners.

aDIsease
05-25-2009, 08:52 AM
i just got these headlight but the cut offs are a lil low it seems.


http://s578.photobucket.com/albums/ss221/aDIsease/?action=view&current=DSC_0009.jpg

es_fact
05-25-2009, 09:12 AM
i just got these headlight but the cut offs are a lil low it seems.


http://s578.photobucket.com/albums/ss221/aDIsease/?action=view&current=DSC_0009.jpg


there's a thread somewhere where it shows how to adjust the ebay heads

I don't think you have the same lights, but check it anyways see if you can atleast use that as reference,you may just have them adjusted incorrectly.

aDIsease
05-27-2009, 07:20 AM
ya i just got them from the depo man.

it could also be cuz they arent sitting fully in. the tops are sticking out a bit, so my hood doesnt even fully cover them anymore.

i might have to do some cutting and trimming to the front frame to make them flush, maybe that will solve the cutoff, then just fine tune it but the adjustments *(if there are some)

did anyone else have troubles fitting the depo lights into ur 2003 galant?

QnzMostWanted
05-27-2009, 07:43 AM
jdm/world spec heads are longer than US heads, u have to trim the rad support to get them to fit properly

Galante
05-27-2009, 08:13 AM
https://www.thegalantcenter.org/showthread.php?t=30506

They have been laying around the warehouse, the mounting tabs are broken but the headlights can still mount just fine. They are brand new. Reasonable offer and it is gone.

Are these from a jdm housing??

ricky_db
05-28-2009, 02:55 AM
:075:check the date of this post
Are these from a jdm housing??

aDIsease
05-28-2009, 03:57 PM
is there any way to adjust the lights?

i tried lookin all over the back of the heads, even removed the hid to look inside to see if i could see anything but couldnt.

any suggestions?

javi
05-28-2009, 07:16 PM
anyone else having problems looking at the sites?

AVERAGE
05-29-2009, 12:30 PM
There should be adjusting screws on the back of the heads for up/down and one for side to side.

showtime
05-29-2009, 01:25 PM
are there any USDM spec projectors besides the ebay ones?

AVERAGE
05-29-2009, 01:56 PM
Sure, there may be a set floating around or you can pm ericbla03 and see if he's still making them or has another set.

showtime
05-29-2009, 01:59 PM
thanks man!

depoautolights
10-18-2009, 07:52 PM
haven't been on here in a minute. i will be reregistering as a vendor but still have these in my warehouse taking up space, someone grab them from me for $175. i sell these for $500. only thing wrong with them is green halos which can ge taken out and changed and a mounting tab broken which does not affect mounting.

galantofva
10-20-2009, 09:41 AM
can you give me a couple days to get the money together?? And can you change the halo color? Oh and are they two peice or one peice? I cant see them cause the links are broken?

depoautolights
10-21-2009, 01:09 PM
http://depoautolights.com/mitsubishi-galant-dual-halo-projector-headlights-p-517.html?osCsid=5708ebd0b9d0cb757b2e057d3a6ad448

they are the same lights on here, the green one...its first come first serve basis....i wont be able to change the halo color you will have to do that yourself

depoautolights
10-21-2009, 01:15 PM
can a mod please reply me on how to reregister a vendor account? proto's acct will not accept PMs.