Need your opinion on head lights

[jvilla00V6es]

I found these at Depoautolights.com
They say that they are OEM JDM and they say they there is no wiring need just PLUG AND PLAY. Does any one have experience with them. Your thoughts

Dual Projectors w/ dual halos
http://i18.photobucket.com/albums/b150/jvillaroc/pro3.jpg
Single Projectors
http://i18.photobucket.com/albums/b150/jvillaroc/NOCCFL.jpg
Back of Single Projectors
http://i18.photobucket.com/albums/b150/jvillaroc/proh7.jpg

[polishmafia]

Have you searched the forums and found out that these won't fit your car without some modification? That you will have gaps around the grill? That you need to wire up the highs and lows yourself? Nothing is plug and play.

[jvilla00V6es]

I have seen some post about JDM head lights but i wasnt for sure if they were apply it to these.

thanks

[IceDouTGaLanT]

https://www.thegalantcenter.org/forumdisplay.php?f=91

check the link out for how to's on your car, might just answer some questions you have about things

[4g63lover]

Have you searched the forums and found out that these won't fit your car without some modification? That you will have gaps around the grill? That you need to wire up the highs and lows yourself? Nothing is plug and play.

Actually Pete, from looking at the pics posted, these depo projectors look like they actually might be plug and play electrical wise. not sure though. Nonetheless jvilla, you will need to cut the radiator support and get a jdm grille.

The modification needed to the radiator support is whats stopping me to go JDM.

[QnzMostWanted]

no, u still gotta rewire ur harnesses to separate teh high's and lows , these are plug and play for JDM/World Spec Galants

[jvilla00V6es]

Thanks for your input. I dont know about doing all that cutting and adjustments . I think I will just stick with my stock ones for now. but i will change my rear light to jdm.

[QnzMostWanted]

just remember u will have to rewire the rears as well, cuz JDM tails are 4 bulb whereas USDM tails are 3 bulb

[jvilla00V6es]

i would rather do that than cut in to the car. but isnt there 2 different to choose from

[QnzMostWanted]

either one u gotta rewire.

[4g63lover]

i would rather do that than cut in to the car. but isnt there 2 different to choose from

There are the 2nd gen tails
http://memimage.cardomain.com/member_images/9/web/489000-489999/489054_89_full.jpg

and there are the 3rd gens
http://i10.photobucket.com/albums/a103/4g63lover/baby%20g/DSCF0003-3.jpg

both in which need modification to the taillight housing and splicing in of wires.

you could get away with using 3 bulbs but you will have a part of the lens that doesn't have function.

[RedGalant2k1]

both in which need modification to the taillight housing and splicing in of wires.

you could get away with using 3 bulbs but you will have a part of the lens that doesn't have function.

If you have 3rd gens you have to modify the wire harness to get things to sit flush like OE. The through placement for the USDM wiring is off center from what the JDM Galants have. At least thats the issue I had with my Amber 3rd gens. I suspect all 3rd gens are the same way.

See my sig for pictures of the amber 3rd gens.

Btw, I would suggest that when anyone does this you buy an extra wire harness and just simply splice to the JDMs using the already existing JDM bulbs. You don't need to modify the housing to accept any other type of bulb, all bulb types can be bought at your local auto parts supplier, or at the least Ebay.

[greddy]

If you want a different set of headlights, try blacking out your headlights and getting swtichbacks. I'm selling a set of blacked out headlights.
https://www.thegalantcenter.org/showthread.php?t=31853

[polishmafia]

The modification needed to the radiator support is whats stopping me to go JDM.

Its really not that bad. Just cutting out a few inches of extra metal. Hell, call it weight reduction for going faster if you want haha! :)

[RedGalant2k1]

Its really not that bad. Just cutting out a few inches of extra metal. Hell, call it weight reduction for going faster if you want haha! :)

Well, that or modify the headlight itself.

[airborneparainf82]

Can make a set of dual halos w/projector low and reflector high, USDM fitmet with no modification needed.

Check it out and lemme know if your interested.
https://www.thegalantcenter.org/showthread.php?t=31862