SES Light....but car passes scan

[fliegendaffe]

So, I've been having the SES light issue for a few weeks now. First it was code P0400 (and yes, mitsubishi pulled this themselves as well), and i changed out both the egr valve and egr vacuum solenoid. but now after the codes were cleared, the SES light comes back on and when it's put on the scanner it passes and no code comes up. does anyone have an idea of what the heck is going on?

[fatal1]

the computer needs time to recalibrate itself, you have to drive like 30 miles or so before it completely resets, although if the light is on some type of code should be coming up

[fliegendaffe]

i've driven 40-50 miles already

[fliegendaffe]

ok problem solved. took the car back to mitsu and they found out that the part was faulty out of the box. i still think that is weird that it didn't throw a code when the light was on.

[RedGalant2k1]

ok problem solved. took the car back to mitsu and they found out that the part was faulty out of the box. i still think that is weird that it didn't throw a code when the light was on.

The DTC set conditions were not met. Good to see its fixed though.