PDA

View Full Version : about offset for 8G



I-chih
11-04-2008, 06:59 PM
i am looking for 18" rims for my 8G GTZ and those have many different offset
i know +45and up is ok. +38 will rubbing.

QA is how about +40 (225-40/18 tires)??

4g63lover
11-04-2008, 07:10 PM
+38 will only rub if you dont roll the fenders I believe. 00GalantGuy is running an 18x8.5 wheels with +38 offset. pm him about it

RedGalant2k1
11-04-2008, 07:20 PM
Stock height you will be fine, if you are lowered with +38mm wheels you *may* need to roll the fenders. It largely depends on how low you lower the car, if at all.

lonestar22
11-04-2008, 07:41 PM
im on 37 no rubbing, but me fenders re slightly folded in the back

9G
11-04-2008, 07:57 PM
yes. 38mm will rub. fold your fenders. it will be worth it.

Reelax
11-04-2008, 11:55 PM
i am looking for 18" rims for my 8G GTZ and those have many different offset
i know +45and up is ok. +38 will rubbing.

QA is how about +40 (225-40/18 tires)??

depends on width. width and offset TOGETHER determine clearance. we can't really calculate for you if you don't give us both measurements. w/ 225/40r18 tires i am assuming 7"-8" wheels +40? that should fit fine unless your drop deep, then you will have to roll rear fenders.

6G72gearhead
11-06-2008, 02:16 PM
It really depends on your suspension set up. I was on a +12 set with compound rubber, and that would rub a little in the rear. Now with the JIC coilovers and about 1 3/4" drop in the front and 1 1/4" out back it doesn't rub at all.

The wheels in the picture are a +35 17 x 8 rear 17 x 8.5 in front. Also on a 245 so there is alot of tire there to go with it.

01nygalant
12-24-2008, 05:05 PM
will 18 inc wheel rub with tiens and eibach on v6?

00galantguy
12-24-2008, 05:09 PM
+38 will only rub if you dont roll the fenders I believe. 00GalantGuy is running an 18x8.5 wheels with +38 offset. pm him about it

What he said. I run 18x 8.5 enkeis. I run progress springs and gr2 struts. The only time I ever rub is over large bumps... and thats only after I got an alignment and the camber was off. Before the alignment it never rubbed

Reelax
12-24-2008, 06:11 PM
will 18 inc wheel rub with tiens and eibach on v6?

width? offset? tire size?

kalvinsaid
12-24-2008, 10:23 PM
dang! this whole time i thought my evo IXs were 45 offset...but they're actually 38...WHAT DO I DO?! i dont wanna waste my moneys on rolling my fenders. 8(

SleekGTZ
12-24-2008, 11:09 PM
Mine doesn't rub. Although I'll still definitely roll my fenders (or dremel) after all this snow crap.

I have 18x7.5 with +40mm offset. Tires are 225/40/18. Lowered on Tein S-Tech, KYB-GR2.

Reelax
12-25-2008, 08:50 AM
dang! this whole time i thought my evo IXs were 45 offset...but they're actually 38...WHAT DO I DO?! i dont wanna waste my moneys on rolling my fenders. 8(

just go get the right size tire. 225/45r17 (or even 215/45r17 if you're paranoid).

kalvinsaid
12-25-2008, 11:43 AM
i shalllllllllll

(and merry christmas everyone.)

RedGalant2k1
12-25-2008, 01:09 PM
dang! this whole time i thought my evo IXs were 45 offset...but they're actually 38...WHAT DO I DO?! i dont wanna waste my moneys on rolling my fenders. 8(

Rolling your fenders is free if you use a bat and a heat gun.

kalvinsaid
12-25-2008, 02:54 PM
Rolling your fenders is free if you use a bat and a heat gun.

never. you wouldnt give your gf charcoal when she asked for makeup would you? same thang...HAHAHH (no offense to the people who used a bat and a heatgun)