Niytrus
01-26-2003, 03:16 PM
I decided to put gauges in my galant the other day... stupidly I cut the wires instead of using wire tap connectors, but now I reconnected the wires (the black and green wires from the dimmer) and used wire taps. The gauges are working fine, and they look great.
*Now heres the problem*: When I turn on the interior lights, or when I twist the knob further to turn on the headlights, a fuseable link in the engine start to make a very loud noise. When I went to look at it it shakes/vibrates. This only happens when the lights go on. Now if I start my car, this doesnt happen. I took the fuseable link out, and then everything was fine, except my lights of course, I tried replacing it, still the same thing. Im gussing I might of screwed up something possibly by grounding a dimmer wire that I cut durring gauge installation.
Any help would be greatly appreciated. Thanks
*Now heres the problem*: When I turn on the interior lights, or when I twist the knob further to turn on the headlights, a fuseable link in the engine start to make a very loud noise. When I went to look at it it shakes/vibrates. This only happens when the lights go on. Now if I start my car, this doesnt happen. I took the fuseable link out, and then everything was fine, except my lights of course, I tried replacing it, still the same thing. Im gussing I might of screwed up something possibly by grounding a dimmer wire that I cut durring gauge installation.
Any help would be greatly appreciated. Thanks