Motor mount inserts

[jamesgalant]

I was searching around for 8g motor mounts and found this....
http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__Prothane-Motor-Mount-Inserts-00-05-Eclipse-V6-13-1903_W0QQitemZ130270245401QQadiZ2865QQadnZCarQ20Q2 6Q20TruckQ20PartsQ20Q26Q20AccessoriesQQcmdZViewIte mQQptZMotors_Car_Truck_Parts_Accessories?hash=item 130270245401&_trksid=p4506.c0.m245&_trkparms=72%3A543%7C65%3A12%7C39%3A1%7C240%3A1318 \

ITs motor mount inserts for the 3g eclipse "Prothane Motor Mount Inserts 00-05 Eclipse V6 13-1903"
will it work with our stock motor mounts??
HAs anyone replace the motor mounts with inserts???
thanks your help is very much appricated

[WhiteGalant]

If you have the v6 these will work, I know of one other member, boostzealot. He has them and said they work well. You are going to notice that when the car is as idle there will be a little more vibration and when it shifts it will be a little bit harder of a shift.

[jamesgalant]

nope i have the 4 cyl..should i just buy the specific galant motor mounts?? cuzz the inserts are under 100 but if i go with the galant motor mounts im paying additional 100 for the new mounts + inserts..
Ive searched any many people has said inserts does cause vibration if your car is not a performance car?? does any one who have motor inserts clear this up??

[g-ridda]

yes they make your car shake alot and its not good for daily driving.if you do want some i have 3 inserts with motor mounts included for 80 shipped

[jamesgalant]

thanks ridda but im good that was the whole point to eliminate the vibration....Do you know if V6 3.L motor mounts will fit on a I4 2.4 l????? cuzz on ebay their like 199. shipped but its for a V6 i gotta I4..lemme know thanks

[WhiteGalant]

No the the V6 and I4 mounts are diffrerent.

[g-ridda]

no they dont fit look for eclipse4cyl mounts and galant 4 cyl mounts but first MAKE SURE your motor mounts is whats causing the vibration. if they are then do this http://www.raktron.com/misc/mt.htm look for used mounts if you cant afford having your car down.

[Fishboy55]

Since no one else mentioned it, replacing the inserts is a major pain in the ass. Those of us that have done it or tried, usually resorted to a blowtorch to burn out the old inserts, then a press or a vice to put the new ones in the old mounts. It's much easier to buy the mounts with the urethane inserts already in them. As for vibration, I've had urethane mounts on my motor for several years and the vibration isn't that annoying. Yea, it's not going to feel as smooth as a CVS when it idles, but it's not going to rattle your fillings out of your teeth either. It IS going to eliminate any wheel hop and transfer more traction to the ground than stock mounts and urethane mounts will last for the life of your car.