PDA

View Full Version : valves


Galant306m
11-23-2008, 02:46 PM
i need to order valves for my head and i was looking at this kit, i want to stay with stock sizing what do you guys think.????

http://cgi.ebay.com/ebaymotors/4G63-Head-kit-stainless-valves-guides-lash-adjusters_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c 66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3 286Q2ec0Q2em14QQhashZitem380081100233QQitemZ380081 100233QQptZRaceQ5fCarQ5fParts
Shadow19
11-23-2008, 02:54 PM
Not a bad deal considering that 3g lifters are 100 alone.
Galant306m
11-23-2008, 03:13 PM
bought them
mko
11-24-2008, 05:51 PM
i need to order valves for my head and i was looking at this kit, i want to stay with stock sizing what do you guys think.????

http://cgi.ebay.com/ebaymotors/4G63-Head-kit-stainless-valves-guides-lash-adjusters_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c 66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3 286Q2ec0Q2em14QQhashZitem380081100233QQitemZ380081 100233QQptZRaceQ5fCarQ5fParts

Were your old valves bent? Id have spent money on lifters and seals instead.
Galant306m
11-25-2008, 01:30 AM
Were your old valves bent? Id have spent money on lifters and seals instead.

yea the old valves are bent, the timing belt snapped during start up, the motor still held compression on all cylinders but it was low.
Shadow19
11-25-2008, 05:27 AM
yea the old valves are bent, the timing belt snapped during start up, the motor still held compression on all cylinders but it was low.


Did it damage the valve seats?
Galant306m
11-25-2008, 01:41 PM
Did it damage the valve seats?

he didnt think that it did, i have yet to get the old valves out, the valves actually still seat so we are sure that the head is fine.
Shadow19
11-25-2008, 02:25 PM
he didnt think that it did, i have yet to get the old valves out, the valves actually still seat so we are sure that the head is fine.

Well.. just because they LOOK like they seat means NOTHING. I wish you luck though. Rule of thumb is that you ALWAYS check shit like that before you assume and waste money.
Galant306m
11-26-2008, 05:19 PM
meh it will be all good.